All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Conductive Silver Ink Pen - Micro Tip [CW2200MTP]
SKU: AF-515 | Brand: Adafruit
Experiment with paper electronics with this silver conductive ink pen that will let you draw traces! We like the make of this pen, it has a nice liquid silver ink that flows easily, and it works great. In just 3 minut...
Delivered by Mon 13 Jul
Digital Potentiometer - 10K
SKU: SF-COM-10613 | Brand: SparkFun
A digital potentiometer that lets you control a voltage divider with serial signals from your microcontroller. Wire it up like a standard potentiometer, then use digital commands to adjust the wiper position — no mech...
Delivered by Tue 23 Jun
Tweezers - Curved (ESD Safe)
SKU: SF-TOL-10602 | Brand: SparkFun
Precision curved tweezers with an ESD-safe coating, ideal for handling surface-mount components and other small electronic parts. The fine curved tip provides excellent control when placing or removing tiny components...
Delivered by Tue 23 Jun
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
SKU: AF-3286 | Brand: Adafruit
A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making i...
Delivered by Mon 13 Jul
3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
SKU: AF-3287 | Brand: Adafruit
A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making...
Delivered by Mon 13 Jul
Coin Cell Battery Holder - 12mm (SMD)
SKU: SF-PRT-10592 | Brand: SparkFun
This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the batte...
Delivered by Tue 23 Jun
0.1 (2.54mm) Crimp Connector Housing: 1x12-Pin 5-Pack
SKU: PL-1919 | Brand: Pololu
These 1×12-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire c...
Delivered by Tue 23 Jun
0.1 (2.54mm) Crimp Connector Housing: 2x16-Pin 5-Pack
SKU: PL-1918 | Brand: Pololu
These 2×16-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 32-wire conn...
Delivered by Tue 23 Jun
RF Link Receiver - 4800bps (315MHz)
SKU: SF-WRL-10533 | Brand: SparkFun
A simple 315 MHz wireless receiver module that pairs with 315 MHz transmitters to create a basic one-way data link. It fits easily into a breadboard and works well with microcontrollers like Arduino for straightforwar...
Delivered by Tue 23 Jun
Adafruit Perma-Proto - pack of 3 - Half size
SKU: AF-571 | Brand: Adafruit
A value pack of three Adafruit Perma-Proto Half-Sized Breadboard PCBs. Each board mirrors the layout of a standard half-size solderless breadboard with 30 rows of 5-hole connected pads, four power bus rails, and clear...
Delivered by Mon 13 Jul
9V Battery Holder
SKU: SF-PRT-10512 | Brand: SparkFun
A snap-in 9V battery holder with a 5.5mm/2.1mm centre-positive barrel jack connector. The battery clicks securely into place, and three mounting holes allow you to attach the holder to an enclosure or chassis. Key Fe...
Delivered by Tue 23 Jun
Adafruit Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player
SKU: AF-3357 | Brand: Adafruit
The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, wi...
Delivered by Mon 13 Jul
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Tue 23 Jun
Panel Current Meter - 0 to 9.99A
SKU: AF-574 | Brand: Adafruit
Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to measure current draw. A shunt is already on board so its very easy to hoo...
Delivered by Mon 13 Jul
Panel Temperature Meter / -30 to +70 °C
SKU: AF-576 | Brand: Adafruit
Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...
Delivered by Mon 13 Jul
0.1 (2.54mm) Crimp Connector Housing: 1x10-Pin 5-Pack
SKU: PL-1909 | Brand: Pololu
These ten-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire co...
Delivered by Tue 23 Jun
12V Solenoid Valve - 3/4
SKU: SF-ROB-10456 | Brand: SparkFun
This 12V DC solenoid valve controls water flow through a 3/4″ threaded inlet and outlet. It is normally closed — fluid is blocked until 12V is applied to the fast-on spade connectors on the solenoid coil. Connect it t...
Delivered by Thu 2 Jul
Liquid Pump - 350GPH (12v)
SKU: SF-ROB-10455 | Brand: SparkFun
The SEAFLO mini water pump is a submersible 12 V pump capable of moving up to 1325 litres per hour (350 GPH). Powered by a heavy-duty 1.5 A motor housed in a tough thermoplastic body, it handles continuous operation i...
Delivered by Tue 23 Jun
Nut - Metal (4-40, 10 pack)
SKU: SF-PRT-10454 | Brand: SparkFun
Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity ...
Delivered by Tue 23 Jun
SPI/I2C Monochrome 60x32 0.5 OLED Display for Arduino
SKU: DF-DFR0376 | Brand: DFRobot
INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 sc...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
