All Products

SKU: TB-RR0555 | Brand: Little Bird

A pack of eight 200Ω metal film resistors rated at 0.5W with 1% tolerance. These through-hole axial resistors are the same physical size as standard 1/4W carbon film resistors, making them a drop-in upgrade with doubl...

SKU: SF-DEV-11893 | Brand: SparkFun

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery a...

SKU: TB-RR0559 | Brand: Little Bird

A pack of eight 300Ω metal film resistors rated at 0.5W (½W) with 1% tolerance. These through-hole axial resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgrade where highe...

SKU: SF-COM-00532 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard, yellow LED. The lens is 3mm in diameter and it is diffused.

SKU: SF-COM-00530 | Brand: SparkFun

A super bright yellow 5 mm LED with a clear lens, delivering high-intensity output that's ideal for indicator lights, visual alerts, and hobby electronics projects. The clear lens provides a focused beam with excellen...

SKU: SF-PRT-13875 | Brand: SparkFun

This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the MyoWare Muscle Sensor line. Each pin has a spacing of 0.1" in between each other. Documents: Da...

SKU: SF-BOB-00500 | Brand: SparkFun

8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devi...

SKU: DF-FIT0333 | Brand: DFRobot

A lightweight, thin, and truly flexible solar panel rated at 1.5V / 250mA (0.5W). Unlike rigid solar panels, this one can be bent, sewn, or adhered to curved surfaces, making it perfect for wearable electronics, porta...

SKU: SF-COM-00523 | Brand: SparkFun

High-quality radial electrolytic capacitors rated at 10µF / 25V. These low-profile decoupling capacitors are essential components for smoothing power supply noise, suppressing transients, and stabilising voltage in a ...

SKU: SF-WRL-11812 | Brand: SparkFun

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, att...

SKU: SF-BOB-00497 | Brand: SparkFun

8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.0...

SKU: SF-CAB-00504 | Brand: SparkFun

A BNC to alligator clip cable for connecting oscilloscopes, function generators, and other BNC-equipped instruments to test points, components, and bare wires. The cable has a standard BNC male connector on one end an...

SKU: DF-DFR0272 | Brand: DFRobot

An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional sh...

SKU: DF-TEL0070 | Brand: DFRobot

A multi-protocol converter board that supports USB, TTL, RS232, and RS485 interfaces. It can convert signals between any two protocols and supports one input to multiple outputs simultaneously — for example, convertin...

SKU: AF-2972 | Brand: Adafruit

This 9×16 Charlieplexed LED matrix features green LEDs arranged in a grid designed to pair with the Adafruit IS31FL3731 16×9 Charlieplexed PWM LED Matrix Driver. With 144 individual LEDs in a compact package, it's ide...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: SF-PRT-00139 | Brand: SparkFun

A USB Type-B female connector with 0.1" pin spacing, suitable for use on development boards and perfboard. The four connection pins fit standard 2.54 mm pitch headers. The two support posts can be accommodated by dril...

SKU: DF-DFR0055 | Brand: DFRobot

This is universal sensor adapter V2.0, it can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination.Improvment compare with the old version,we a...

SKU: PL-1185 | Brand: Pololu

The ACS714 Current Sensor Carrier provides a compact breakout for Allegro's ±5A ACS714 Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV R...

SKU: SF-PRT-00112 | Brand: SparkFun

Your first exposure to electrical engineering - the bread board. Who knew it would bring so much frustration? This is your standard solderless breadboard - three binding posts, two power buses, black aluminum plate ...