All Products

SKU: LB-LR0295 | Brand: Little Bird

A simple 9V battery holder with a DC barrel connector. Provides a convenient way to mount and connect a 9V battery to your electronics projects. Key Features DC Barrel Connector – Standard connector for easy integr...

SKU: PL-1406 | Brand: Pololu

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.

SKU: LB-LS6547 | Brand: Little Bird

DIY FM Radio Kit – 87-108MHz Digital DisplayTake your soldering skills to the next level with this DIY FM Radio Kit! Designed for hands-on learning, this kit lets you build a fully functional FM radio receiver while r...

SKU: LB-PT-MICROUSB | Brand: Little Bird

This microUSB extender has a female microUSB at one and and male microUSB at the other end.  You can use the inline switch to power on or off your device without having to keep unplugging it.This works with the R...

SKU: LB-LR0029 | Brand: Little Bird

DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use.  This  DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption...

SKU: AF-4397 | Brand: Adafruit

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2m...

SKU: AF-2780 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon ...

SKU: PI-CAM008 | Brand: Pimoroni

Light up the night with this night vision camera module with infra-red LEDs, for Raspberry Pi! Available with ether a standard (70°) or a wide-angle (160°) lens, this camera has IR LEDs that allow the ...

SKU: LB-PT-HEATSINK-BL | Brand: Little Bird

An extra-large aluminium heatsink for the Raspberry Pi 4, featuring 98 low-profile fins for maximum heat dissipation. At just 5 mm tall, it fits under most HATs, giving you passive cooling without limiting expansion o...

SKU: LB-LS6795 | Brand: Little Bird

8-90V to 5V 5A DC-DC Step-Down Converter (25W, USB-C)This compact and efficient DC-DC step-down converter is designed to take an input voltage from 8V to 90V and regulate it down to a stable 5V output at up to 5A (25W...

SKU: LB-2-PIR-AUDIO | Brand: Little Bird

This motion-activated MP3 player is designed to play audio automatically when movement is detected by PIR sensors. The sensors are separate from the player, so they can be positioned where they are most useful while t...

SKU: LB-PT101011M | Brand: Little Bird

A 20-metre roll of 5 mm wide copper tape with conductive adhesive backing. The conductive adhesive ensures electrical continuity through the tape, making it ideal for creating low-profile circuit traces, RF shielding,...

SKU: SF-DEV-16996 | Brand: SparkFun

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and t...

SKU: PH-TPH-017 | Brand: PiHut

The 3D RGB Xmas Tree sits on top of your Raspberry Pi and features 25 individually addressable RGB LEDs that you can control with Python. Change colours, adjust brightness, create fading effects, or build your own fes...

SKU: LB-LR0214-148A | Brand: Little Bird

This PN532-based NFC module is designed for near field communication projects in the 13.56MHz range, with a maximum communication distance of 30mm.The board includes its own antenna and can communicate via SPI, IIC (I...

SKU: DF-FIT0265 | Brand: DFRobot

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...

SKU: SF-SEN-13879 | Brand: SparkFun

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...

SKU: AF-261 | Brand: Adafruit

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...

SKU: SF-COM-11118 | Brand: SparkFun

Super bright 10 mm white through-hole LEDs with high luminous output of 16,000–20,000 mcd. Their large size and narrow 30° viewing angle make them ideal for focused lighting, indicators, and decorative projects. Spec...

SKU: DF-SER0043 | Brand: DFRobot

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...