All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
KnockOffDuino®
SKU: LB-LR0064 | Brand: Little Bird
The KnockOffDuino® Uno is functionally the same as the Arduino Uno R3 at a fraction of the cost. It is the Arduino for beginners and 100% Uno compatible, however it uses the CH340G usb to serial chip instead of the...
Delivered by Mon 5 Oct
12V Precision Temperature Controller with 3 digit display 10Amp Relay
SKU: LB-LR0214-16 | Brand: Little Bird
This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (i...
Delivered by Mon 5 Oct
DFPlayer - An Arduino Mini MP3 Player
SKU: DF-DFR0299 | Brand: DFRobot
Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module player with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speake...
Delivered by Mon 5 Oct
DHT22 module with cable
SKU: LB-LR0102 | Brand: Little Bird
The DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor comes pre-calibrated and in a breadboard compatible module form so you don...
Delivered by Mon 5 Oct
50cm NTC Thermistor Temperature Sensor 10K 3470
SKU: LB-LS2696 | Brand: Little Bird
A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ...
Delivered by Mon 19 Oct
Potentiometer with Built In Knob - 10K ohm
SKU: LB-LS2921 | Brand: Little Bird
Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiomete...
Delivered by Mon 5 Oct
LDR Photoresistor
SKU: LB-LR0282 | Brand: Little Bird
This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ. ...
Delivered by Mon 5 Oct
IR Flame Sensor Module
SKU: LB-FLAME-LIGHT | Brand: Little Bird
This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...
Delivered by Mon 5 Oct
Prong Soil Moisture Sensor for BBC micro:bit
SKU: KI-5647 | Brand: Kitronik
The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...
Delivered by Mon 5 Oct
Passive Buzzer
SKU: LB-LR0289 | Brand: Little Bird
This passive buzzer is a simple sound-making component for Arduino, microcontroller and electronics projects. Unlike an active buzzer, it needs a changing signal to produce sound rather than generating a tone automati...
Delivered by Mon 5 Oct
UV Ultraviolet Ray Detection Sensor
SKU: LB-LS2299 | Brand: Little Bird
A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...
Delivered by Mon 5 Oct
Micro:bit Smart Home Kit (without micro:bit board )
SKU: EF-EF08197 | Brand: ElecFreaks
The ElecFreaks Smart Home Kit is a micro:bit project kit for building interactive smart home models. It includes sensors, actuators, and cardboard building materials to create miniature scenes — a windowsill, wardrobe...
Delivered by Mon 5 Oct
KnockOffDuino MEGA 2560
SKU: LB-LR0065 | Brand: Little Bird
The KnockOffDuino MEGA is a budget-friendly, fully Arduino MEGA 2560 R3-compatible development board. It features the same ATmega2560 microcontroller, pinout, and form factor as the original, making it a cost-effectiv...
Delivered by Mon 5 Oct
Audio Expansion Module for Raspberry Pi Pico
SKU: WS-20167 | Brand: Waveshare
Features At A Glance The Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wi...
Delivered by Tue 27 Oct
FireBeetle Board ESP32-E (Arduino Compatible)
SKU: DF-DFR0654 | Brand: DFRobot
The FireBeetle Board ESP32-E is a compact IoT development board based on the ESP-WROOM-32E module with a Tensilica LX6 dual-core processor running at 240MHz. It supports Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BR/EDR + ...
Delivered by Wed 14 Oct
Flame Sensor Module KY-026
SKU: LB-LR0007 | Brand: Little Bird
Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor Two outputs mode: AO: analog output, real-time ou...
Delivered by Mon 5 Oct
Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302
SKU: AF-2130 | Brand: Adafruit
The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable ...
Delivered by Mon 5 Oct
Bluetooth 5.0 Audio Receiver Board
SKU: DF-DFR0718 | Brand: DFRobot
This is a compact and cost-effective Bluetooth 5.0 audio receiver module that supports automatic reconnect function. It can be powered by a micro USB or 3.7V lithium battery. You can easily convert your old speaker...
Delivered by Mon 5 Oct
Teensy Audio Adapter Board (Rev D)
SKU: SF-DEV-15845 | Brand: SparkFun
This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Tee...
Delivered by Mon 5 Oct
Tiny 2350
SKU: PI-PIM721 | Brand: Pimoroni
The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...
Delivered by Mon 26 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
