All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
SKU: EF-EF04079 | Brand: ElecFreaks
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...
Delivered by Mon 23 Nov
SparkFun gator:microphone - micro:bit Accessory Board
SKU: SF-SEN-15289 | Brand: SparkFun
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates an electret microphone into SparkFun's gator:bit series of gator-clippable accessories, enabling it to be easily interfaced with the micro:b...
Delivered by Mon 23 Nov
OLED Shield LCD Adapter
SKU: FT-OLSH | Brand: Freetronics
Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connecte...
Delivered by Mon 23 Nov
Adafruit Feather HUZZAH with ESP8266 WiFi
SKU: AF-2821 | Brand: Adafruit
The Feather HUZZAH ESP8266 is an all-in-one Wi-Fi development board with built-in USB and battery charging. Powered by the ESP8266 with a full Wi-Fi stack, it's a compact and affordable way to add Internet connectivit...
Delivered by Mon 23 Nov
Temperature and Humidity Sensor Module KY-028
SKU: LB-LR0010 | Brand: Little Bird
Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...
Delivered by Mon 23 Nov
Pi-DigiAMP+
SKU: PI-IQA002 | Brand: Pimoroni
The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instrume...
Delivered by Mon 23 Nov
AMP:BIT class D amplifier for micro:bit with headphone jack
SKU: PI-PPMB00130 | Brand: Pimoroni
The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control w...
Delivered by Mon 23 Nov
Adafruit Feather 32u4 Bluefruit LE with Headers - Assembled
SKU: AF-3379 | Brand: Adafruit
The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug st...
Delivered by Mon 23 Nov
Thermistor NTC 5MMDIA 100KR
SKU: TB-RN3444 | Brand: Little Bird
A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensatio...
Delivered by Mon 23 Nov
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record [v4]
SKU: AF-1381 | Brand: Adafruit
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...
Delivered by Mon 23 Nov
Arduino Pro Mini 328 - 5V/16 MHz
SKU: AF-2378 | Brand: Adafruit
The Arduino Pro Mini is SparkFun's minimal design approach to Arduino. It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board. There are no connectors attached -...
Delivered by Mon 23 Nov
Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)
SKU: PL-2463 | Brand: Pololu
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter an...
Delivered by Mon 23 Nov
SparkFun Thumb Joystick Breakout
SKU: SF-BOB-09110 | Brand: SparkFun
This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.
Delivered by Mon 23 Nov
Flexiforce Pressure Sensor - 1lb
SKU: DF-SEN0068 | Brand: DFRobot
This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the re...
Delivered by Mon 23 Nov
Infrared Proximity Sensor - Sharp GP2Y0A21YK
SKU: SF-SEN-00242 | Brand: SparkFun
The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure ...
Delivered by Mon 23 Nov
Text-to-Speech Shield for Arduino
SKU: DF-DFR0273 | Brand: DFRobot
Give your Arduino project a voice with this text-to-speech shield. Built around the IFLYTEK XFS5051CE speech synthesis chip, it converts text strings into spoken audio in English and Chinese, with support for both mal...
Delivered by Mon 23 Nov
Circuit Playground Classic
SKU: AF-3000 | Brand: Adafruit
Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sew...
Delivered by Mon 23 Nov
Touch screen breakout board (0.5mm FPC)
SKU: AF-334 | Brand: Adafruit
If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...
Delivered by Mon 23 Nov
PSP 2-Axis Analog Thumb Joystick
SKU: AF-444 | Brand: Adafruit
Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable pro...
Delivered by Mon 23 Nov
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared