Actuators

SKU: DF-FIT0565 | Brand: DFRobot

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is...

SKU: AF-3871 | Brand: Adafruit

These are very unusual motors, but we thought they could be handy for projects that need a small geared-down motor. At the core is a 'pager motor' - a small thin DC motor that runs on about 3VDC. That motor is then ge...

SKU: PI-TEK002 | Brand: Pimoroni

A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 recharge...

SKU: PI-COM0811 | Brand: Pimoroni

A miniature brushed DC motor with an 11:1 metal gearbox, fitted with a solderless push header shim for easy prototyping — no soldering required. Simply connect with jumper wires and you're ready to go. The compact for...

SKU: PI-COM0809 | Brand: Pimoroni

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80m...

SKU: AF-3874 | Brand: Adafruit

This 5V electromagnet provides 10kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it perfect for controllabl...

SKU: DF-KIT0015 | Brand: DFRobot

This MiniQ motor wheel set is especially designed for education and hobbies. It features a powerful metal gear motors which provide a speedy robot. With buildin encoders, it can do PID speed control which is Ideal...

SKU: SF-COM-00100 | Brand: SparkFun

These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices. This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The c...

SKU: DF-SER0019 | Brand: DFRobot

DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability. Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°ser...

SKU: PL-993 | Brand: Pololu

A miniature low-power brushed DC motor with a 29.86:1 metal gearbox, designed for robotics and compact mechanical projects. The 6V LP (Low Power) variant draws minimal current while delivering useful torque through th...

SKU: SF-ROB-10846 | Brand: SparkFun

This NEMA 17 bipolar stepper motor delivers 68 oz·in (48 N·cm) of holding torque with a fine 0.9° step angle, providing 400 steps per revolution for high-precision positioning. Its 5mm D-shaft and standard NEMA 17 mou...

SKU: SF-ROB-10456 | Brand: SparkFun

This 12V DC solenoid valve controls water flow through a 3/4″ threaded inlet and outlet. It is normally closed — fluid is blocked until 12V is applied to the fast-on spade connectors on the solenoid coil. Connect it t...

SKU: SF-ROB-10455 | Brand: SparkFun

The SEAFLO mini water pump is a submersible 12 V pump capable of moving up to 1325 litres per hour (350 GPH). Powered by a heavy-duty 1.5 A motor housed in a tough thermoplastic body, it handles continuous operation i...

SKU: SF-ROB-10391 | Brand: SparkFun

A linear push-type solenoid rated for 36 V DC that also works well at 12 V. Solenoids produce linear motion for pushing, pulling, or actuating switches and levers. This unit has a measured throw of approximately 10 mm...

SKU: DF-FIT0467 | Brand: DFRobot

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting h...

SKU: DF-FIT0485 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*210...

SKU: SF-ROB-12608 | Brand: SparkFun

These continuous rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...

SKU: SF-ROB-12607 | Brand: SparkFun

These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...

SKU: DF-FIT0495-G | Brand: DFRobot

A compact metal DC geared motor with a 45:1 reduction gearbox, delivering up to 1.2 kg·cm of torque. The all-metal gears provide durability and stability for robotics and mechanical projects. Features a D-shaped 4 mm ...

SKU: SF-ROB-12429 | Brand: SparkFun

This compact micro gearmotor packs full metal gears into a tiny 26 × 12 × 10 mm body, delivering up to 460 RPM at 12 V with a 50:1 gear ratio. The 3 mm D-shaft and DC-reversible operation make it a versatile choice fo...