Actuators

SKU: DF-FIT1001 | Brand: DFRobot

A compact direct-drive servo motor integrating a brushless outer-rotor motor, encoder, and servo driver into a single unit. By eliminating the traditional gearbox/reducer, it delivers smooth torque, low noise, and lon...

SKU: SF-ROB-17754 | Brand: SparkFun

This 12V brushed DC gearmotor features a 9.68:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft, providing 464.64 counts per revolution of the gearbox output. The two-channel Hall eff...

SKU: DF-SER0059 | Brand: DFRobot

A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for indiv...

SKU: SF-ROB-09347 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-p...

SKU: SF-ROB-09238 | Brand: SparkFun

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3k...

SKU: DF-SER0035 | Brand: DFRobot

This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shel...

SKU: DF-FIT0419 | Brand: DFRobot

INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...

SKU: DF-FIT0457 | Brand: DFRobot

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting h...

SKU: DF-FIT0468 | Brand: DFRobot

This compact micro metal gear motor features a 50:1 gear ratio and a D-profile metal output shaft, making it ideal for small robotics platforms and wheeled projects. The shaft dimensions are compatible with Pololu 42×...

SKU: SF-ROB-10189 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power...

SKU: DF-FIT0495-E | Brand: DFRobot

This compact metal DC geared motor features a 99:1 metal gear reduction for high torque output in a small form factor. With a maximum torque of 2.5kg·cm, it's built for robotics, automation, and mechanical projects re...

SKU: DF-FIT1038 | Brand: DFRobot

The M0601 is a compact direct-drive hub motor for intelligent mobile robots, AGVs and AMRs. It combines a brushless DC motor, servo driver and high-precision encoder in a single 102mm hub, reducing the need for extern...

SKU: DF-SER0069 | Brand: DFRobot

Built for demanding multi-axis robots, this smart serial bus servo combines high torque, absolute position feedback and simplified wiring over a TTL serial bus. It is suited to projects such as robotic arms, education...

SKU: DF-SER0070 | Brand: DFRobot

The ST3215 is an intelligent serial bus servo for robotics and automation projects that need strong torque, position feedback and tidy wiring. It runs from a rated 12V supply and delivers 30kg.cm stall torque through ...

SKU: SF-ROB-29919 | Brand: SparkFun

This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics build...