Actuators

SKU: DF-FIT0185 | Brand: DFRobot

This 12 V DC geared motor (model GB37Y3530-12V-83R) pairs a powerful brushed motor with a 131:1 metal gearbox and an integrated Hall-effect quadrature encoder. The encoder provides 16 counts per revolution on the moto...

SKU: DF-FIT0482 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: DF-FIT0495-I | Brand: DFRobot

This is a metal DC geared motor, 20:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 0.7 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Ope...

SKU: DF-FIT0495-H | Brand: DFRobot

This is a metal DC geared motor, 34:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Op...

SKU: DF-FIT0522 | Brand: DFRobot

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds ...

SKU: DF-FIT0302 | Brand: DFRobot

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35...

SKU: DF-FIT0473 | Brand: DFRobot

This metal DC geared motor features a 45:1 metal gear reducer in a compact form factor, delivering up to 4.5 kg·cm of stall torque at 133 RPM. The all-metal gearbox provides durability and reliability for robotics, dr...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: DF-FIT0564 | Brand: DFRobot

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is...

SKU: PI-COM0808 | Brand: Pimoroni

A miniature brushed DC motor with a 20:1 metal gearbox and an extended back shaft for mounting optical encoders. All micro metal gearmotors share the same physical dimensions, so different gear ratios can be easily sw...

SKU: DF-FIT0349 | Brand: DFRobot

This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.6 A at 2.78 V, allowing for...

SKU: DF-FIT0487 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*380...

SKU: AF-4639 | Brand: Adafruit

The first step in a robotics project is to get a motor spinning. Once you've done that you quickly learn that not all motors go the same speed, even if they are the same part number! There are always variations that r...

SKU: AF-4641 | Brand: Adafruit

This N20 micro DC gearmotor includes a built-in magnetic encoder with two Hall effect sensors, providing both speed and direction feedback without additional wiring. The compact N20 form factor makes it ideal for smal...

SKU: DF-FIT0578 | Brand: DFRobot

A compact DC gearmotor with an integrated M3 × 25 mm threaded output shaft, turning it into a simple linear actuator. Rated at 6V with a no-load speed of 98 RPM and a 1:150 gear reduction, it delivers good torque in a...

SKU: DF-FIT0577 | Brand: DFRobot

This DC gearmotor are now in the status of Pre-order and will ship in the end of Jun. This DC gearmotor has an integrated M3*20mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage...

SKU: DF-FIT0565 | Brand: DFRobot

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is...

SKU: AF-3871 | Brand: Adafruit

These are very unusual motors, but we thought they could be handy for projects that need a small geared-down motor. At the core is a 'pager motor' - a small thin DC motor that runs on about 3VDC. That motor is then ge...

SKU: PI-COM0811 | Brand: Pimoroni

A miniature brushed DC motor with an 11:1 metal gearbox, fitted with a solderless push header shim for easy prototyping — no soldering required. Simply connect with jumper wires and you're ready to go. The compact for...

SKU: PI-COM0809 | Brand: Pimoroni

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80m...