Accelerometers & IMUs

SKU: RP-SC0329 | Brand: Raspberry Pi Ltd

Raspberry Pi Sense HAT V2 — Your Mission Control for Data, Dazzle, and DIY Experiments!What if your Raspberry Pi could sense everything—orientation, weather, movement, your own code-controlled lightshow…and let you in...

SKU: AF-4754 | Brand: Adafruit

The BNO085 from Hillcrest Laboratories is a 9-DOF IMU with built-in sensor fusion — it combines accelerometer, gyroscope and magnetometer data on-chip and delivers ready-to-use orientation, motion detection and activi...

SKU: LB-LS5114 | Brand: Little Bird

The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barome...

SKU: WS-19358 | Brand: Waveshare

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating o...

SKU: AF-4554 | Brand: Adafruit

The Adafruit TDK InvenSense ICM-20948 is a compact 9-DoF Inertial Measurement Unit that packs a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer into a single breakout board. It pairs InvenSense's MEMS ...

SKU: SF-SEN-15335 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...

SKU: AF-2472 | Brand: Adafruit

The Adafruit BNO055 breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion — no complex algorithms to write yourself. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on...

SKU: AF-4646 | Brand: Adafruit

The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer...

SKU: SF-SEN-22397 | Brand: SparkFun

The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...

SKU: AF-5309 | Brand: Adafruit

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...

SKU: AF-4413 | Brand: Adafruit

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...

SKU: PL-2739 | Brand: Pololu

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent ...

SKU: DF-SEN0168 | Brand: DFRobot

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface, aiming for low power consumer market applications. It allows measurem...

SKU: AF-4464 | Brand: Adafruit

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...

SKU: AF-4627 | Brand: Adafruit

The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...

SKU: PR-PIM376 | Brand: Little Bird

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rov...

SKU: PL-1268 | Brand: Pololu

The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...

SKU: PL-1265 | Brand: Pololu

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...