Accelerometers & IMUs

SKU: LB-LR0044 | Brand: Little Bird

This compact MPU-6050 module combines a MEMS accelerometer and MEMS gyroscope in a single chip for detecting movement, tilt and rotation across the X, Y and Z axes.Each channel is captured with 16-bit analogue-to-digi...

SKU: LB-LS5114 | Brand: Little Bird

The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barome...

SKU: LB-LR20 | Brand: Little Bird

This kit brings together a wide range of sensor and interface modules for Arduino projects, experiments and classroom learning. It includes input sensors, output modules, switching modules, power modules and useful bu...

SKU: LB-LR0401 | Brand: Little Bird

This compact module is built around the L3G4200D, a low-power 3-axis angular rate sensor with temperature data output. It measures the rate of change in rotation on the X, Y and Z axes, making it useful for motion sen...

SKU: AF-4554 | Brand: Adafruit

The Adafruit TDK InvenSense ICM-20948 is a compact 9-DoF Inertial Measurement Unit that packs a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer into a single breakout board. It pairs InvenSense's MEMS ...

SKU: SF-SEN-15335 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...

SKU: AF-4097 | Brand: Adafruit

A versatile triple-axis digital accelerometer breakout featuring the Analog Devices ADXL343. With selectable sensitivity of ±2g, ±4g, ±8g, or ±16g and up to 13-bit resolution, this sensor handles everything from preci...

SKU: AF-2472 | Brand: Adafruit

The Adafruit BNO055 breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion — no complex algorithms to write yourself. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on...

SKU: AF-4646 | Brand: Adafruit

The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer...

SKU: AF-3886 | Brand: Adafruit

The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: AF-5309 | Brand: Adafruit

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...

SKU: LB-TILT | Brand: Little Bird

A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...

SKU: PJ-PROP_SHIELD | Brand: Little Bird

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes. Motion Sensors - Allows motion interactive light & sound. Audio Amplifier - Clear quality au...

SKU: AF-163 | Brand: Adafruit

A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...

SKU: AF-1231 | Brand: Adafruit

The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...

SKU: SF-SEN-09269 | Brand: SparkFun

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...

SKU: SF-SEN-09836 | Brand: SparkFun

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...

SKU: AF-4413 | Brand: Adafruit

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...

SKU: LB-LS1026 | Brand: Little Bird

The CJMCU-MPU9150 is a 9-axis motion tracking breakout board based on the InvenSense MPU-9150 System in Package (SiP). It combines a 3-axis gyroscope, 3-axis accelerometer, and 3-axis digital compass (magnetometer) in...