All Products
AI Overview
Here are the main Elecrow options, grouped by what you’re building:
Starter & learning kits (best for beginners)
- Elecrow UNO R3 Basic Starter Kit with Tutorial for Arduino ($19.15) — low-cost intro kit built around an UNO R3.
- Elecrow UNO R3 Starter Kit for Arduino ($48.35) — upgraded, more complete Arduino UNO R3 starter kit.
- Elecrow UNO R3 Starter Kit with Mulity Modules for Arduino ($84.25) — larger bundle with 200+ components/modules.
- Elecrow Starter Kit for Arduino ($41.20) — Arduino kit with a mix of sensors + display parts.
- Elecrow 37-in-1 Sensors Module Kit for Arduino ($31.10) — add-on pack of common Arduino sensor/modules.
- Elecrow Electronic Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer ($16.55) — general-purpose breadboard + components bundle for prototyping.
micro:bit kits
- Elecrow Basic Kit for BBC Micro:bit ($19.95) — entry kit for BBC micro:bit projects.
- Elecrow Crowtail Learning Starter Kit for Micro:bit 2.0 ($97.45) — guided kit with 20 lessons (note: micro:bit not included per listing).
Raspberry Pi Pico
- Elecrow Raspberry Pi Pico Advanced Kit with 32 Modules and 32 Projects Lessons ($97.95) — 32 modules + 32 project lessons for Pico learners.
Boards, displays & wireless (project building blocks)
- Crowduino Mega2560 ($42.80) — Elecrow’s Mega2560-compatible board (ATmega2560-based).
- 2.8 TFT Touch Shield V4.3 ($30.40) — 2.8\" 240×320 SPI TFT with resistive touch + SD socket.
- Bluetooth Bee ($29.65) — Bluetooth V2.0+EDR serial module in an XBee-style form factor.
- Lora RFM95 Shield-915MHZ-V1.1 ($28.50) — 915MHz LoRa shield for long-range Arduino comms.
- Elecrow ThinkNode M1 - LoRa Meshtastic Transceiver with 1.54" EPD Screen, GPS & nRF52840 (915MHz) ($80.35) — integrated Meshtastic device with nRF52840 + GPS + 1.54\" EPD, 915MHz.
Portable workstation accessory for Raspberry Pi 5
- 14" CrowView Note with Raspberry Pi 5 Bridge Board ($306.05) — 14\" laptop-style display/keyboard dock designed to pair with Raspberry Pi 5 via bridge board.
What kind of Elecrow product are you looking for?
Collections
Showing 81-100 of 198 products · 72 unavailable products hidden
NodeMCU V2 ESP8266 Development Board
The NodeMCU V2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module) with an on-board PCB antenna and USB programming interface. It supports 802.11 b/g/n wireless networking and can operate in STA, AP, or STA+AP modes with a built-in TCP/IP stack supporting up to 5 simultaneous TCP c...
RFID Reader with Cards Kit- 13.56MHz
This RFID kit includes a 13.56M RF reader module, which use the RC522 IC, plus 2 S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz, it supports ISO 14443A/MIFARE ...
Starter Kit for Raspberry Pi +Arduino
This starter kit comes with the main components such as LCD1602 display,Step motor,Servo,Remote, touch sensor and Ultrasonic distance sensor, you can make some funny little builds by these things. We will provide detailed and clear tutorial(PDF),there are 26 lessons for Raspberry Pi and 30 les...
Raspberry Pi 400 GPIO Expansion Board
GPIO Header adapter for the Raspberry Pi 400 computer.Specification: Size: 5.5 x 4.8 cm Weight: 18g Package List: 1 x Raspberry Pi 400 GPIO Header Adapter
RS232 To TTL Converter Module MAX3232
This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port. It is applicable to a variety of platforms including Arduino / AVR / ARM. For A...
Crowtail Starter Kit for Raspberry Pi
This Crowtail-Starter Kit for Raspberry Pi will be one of the best kits for you to get started with Raspberry Pi and Python! This kit includes a Crowtail-Base Shield for Raspberry Pi and more than 22 modules like RGB LED, ultrasonic ranging sensor, IR and etc. In addition, this kit provides ri...
434Mhz Serial RF Module HC-11 (1-40M)
The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internally — simply send serial data in and it appears wirelessly at the receiving module...
Atmel AVRISP STK500 USB ISP Programmer
AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...
Serial WIFI Transceiver Module ESP8266
This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions f...
5V Brushless Portable Submersible Pump
This compact brushless submersible pump operates on 3.5–9V DC via a USB connector, making it easy to power from a USB power bank, solar panel, or development board. It delivers up to 200L/h flow and can push water up to 1.5m in height, with low noise and low power consumption. The pump uses a hi...
Prototype Shield V3.0 For Arduino Mega
Arduino Mega ProtoShield V3.0 use with Arduino MEGA to build circuit. You can soldering the components on this shield and also you can set up circuit through the mini breadboard.Arduino Mega ProtoShield V3.0 adopts the prototype V3 gold PCB sink process, mainboard golden square pad spacing small,...
NeoPixel Shield- WS2812 RGB LED Matrix
This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onboard Arduino supply and as long as you aren’t lighting up all the LEDs full powe...
315Mhz RF Transmitting Receiver Module
A basic 315MHz RF link kit consisting of a transmitter and receiver module pair. Commonly used for simple wireless remote control, data transmission, and sensor communication between microcontrollers. Works well with the Arduino VirtualWire library for easy integration. The transmitter accepts 3...
Raspberry Pi Pico GPIO Expansion Board
This time Raspberry Pi Foundation developed a powerful device Raspberry Pi Pico that is powered by micro-controller RP2040. It is a compact microcontroller board that would make the work easier for the users which will raise the quality of the products. Some users want to purchase Raspberry P...
433Mhz RF Transmitting Receiver Module
A simple 433 MHz RF link kit consisting of a transmitter and receiver pair, commonly used for basic wireless remote control and data transmission between microcontrollers. The ASK (Amplitude Shift Keying) modulation makes these modules easy to use with popular Arduino libraries such as VirtualWir...
Dual Channel H-Bridge Motor Shield-V1.5
The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users c...
Crowduino Pro Mini (Arduino Compatible)
This Pro Mini version is 100% compatible with the original Arduino Pro mini. We add two analog IO - A6, A7 , and Power Input side add auto recovery insurance, and be allowed USB and Power Supply at same time.It is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input...
BBC Micro bit Prototype Expansion Board
This prototype expansion board breaks out all of the BBC micro:bit's edge connector pins to labelled headers and includes a small breadboard for building circuits. It provides a beginner-friendly way to learn electronics and programming with the micro:bit, making it easy to connect sensors, LEDs,...
1x6 Stackable Header For Arduino Shield
A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on top of each other. Specifications Pins: 6 (1×6 single row) Type: Female stack...
Crowduino Nano V3.1 (Arduino Compatible)
The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial communication, 14 digital I/O pins (6 with PWM), and 8 analogue inputs. Power i...
