All Products

SKU: SF-PRT-28381 · MPN: PRT-28381

This is a single-row straight male header with 14 breakaway pins on standard 0.1 inch (2.54mm) spacing. It is suited to through-hole prototyping, module headers and breadboard-friendly maker projects.The 14x1 format is commonly used with Teensy 3.2 and Teensy 4.0 boards. If you are fitting header...

SKU: SF-PRT-28382 · MPN: PRT-28382

This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...

SKU: AF-4644 · MPN: 4644

This is a great connector for anyone doing RF work, when a straight SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.Mates with any...

SKU: AF-4542 · MPN: 4542

A 10 kg strain gauge load cell for measuring force, weight, and tension. The strain gauge is epoxy-bonded to a robust aluminium bar that protects the delicate foil element and constrains deflection to a safe range. As force is applied, the gauge's resistance changes proportionally, providing a me...

SKU: AF-4540 · MPN: 4540

A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge changes when force is applied and the object is deformed along with the foil and this ...

SKU: AF-4543 · MPN: 4543

A 20 kg strain gauge load cell with four wires, featuring a metallic foil gauge bonded with epoxy to a solid aluminium bar. The aluminium constrains deflection and protects the gauge from damage. Mount one end to a fixed surface using the mounting holes, then apply force to the other end in the d...

SKU: AF-4541 · MPN: 4541

A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge changes when force is applied and the object is deformed along with the foil and this ...

SKU: AF-3068 · MPN: 3068

This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with terminal blocks as well. It's not great for use with breadboards (without tinning) For prototyping with breadboards, perfbo...

SKU: DF-FIT0552

Run your LattePanda on a PC in pip(Picture in Picture) mode at the speed of light. Appreciating that we need a better way to interact between different platforms, the Streaming Cable enables your LattePanda to act like a USB on a PC. Just plug & play! The PiP (Picture in Picture) form also elimin...

SKU: DF-KIT0179-EN

Note: HUSKYLENS and micro:bit board are not included. The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered around AI image recognition, the kit is equipped with 7 external modules and 28 cards that...

SKU: AF-4546 · MPN: 4546

Make fountains or plant-watering projects with this submersible water pump. It's great for beginner projects and super easy to use! The pump is basically a DC motor that is powered with 3V and draws 100mA. When powered, the pump sucks water in from the side of the plastic casing and pushes it out...

SKU: AF-4547 · MPN: 4547

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3 V and draws approximately 100 mA, making it easy to drive from a microcontrolle...

SKU: AF-2201 · MPN: 2201

This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much.  It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller.  You can use an...

SKU: DF-FIT0378

Sumo Robots, roll out! Built for Sumo Robot fight, Sumo Bumper for MiniQ 2WD is a quick add-on that turns your miniQ into a sumo fighter. During the game, each little pusher will locate and knock its opponent right out of the ring while detecting the outside circle should an escape move be neces...

SKU: DF-DFR0559

The Sunflower Solar Power Manager 5V is a high-efficiency solar power management module designed for 5 V solar panels. It features MPPT (Maximum Power Point Tracking) to maximise solar panel efficiency, and supports dual charging via solar panel or USB with up to 900 mA charging current for a 3.7...

SKU: DF-DFR0535

DFRobot is launching a brand new series - Sunflower, focusing on high-efficiency, small power solar energy management for IoT projects and renewable energy applications.   Solar Power Manager is a complete small power and high-efficiency solar power management module. It fea...

SKU: SU-9GMETALSERVO

Product descriptionTest Environment StandardEvery characteristic of the inspect must be normal temperature and humidity carry out the test,temperature 25±5℃ and relative humidity 65±10% of judgment made in accordance with this specification standard testing conditions. Electrical Specificat...

SKU: AF-6050 · MPN: ADA6050

This compact breakout is made for slim USB-C projects where a standard horizontal or vertical connector would sit too high. Its sunken Type-C connector straddles the PCBA, helping keep your build low profile while still breaking out the contacts you need.USB-C gives you a reversible connector, ex...

SKU: YH-6000100127

The Super:bit is a feature-rich expansion board that transforms the BBC micro:bit into the core of robotics and LEGO-compatible projects. With support for DC motors, stepper motors, and servos, plus onboard RGB LEDs and a buzzer, it provides everything needed to build programmable robots — no sol...

SKU: AF-388 · MPN: 388

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work great ...