All Products

SKU: AF-727 · MPN: 727

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...

SKU: AF-3287 · MPN: 3287

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...

SKU: AF-3286 · MPN: 3286

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...

SKU: AF-4048 · MPN: 4048

A compact 1.27 mm (0.05") pitch 2×5 mini SWD box header with a half-shroud and key-notch. A smaller alternative to full-shroud SWD headers, taking up much less board space while remaining compatible with standard 10-pin 1.27 mm IDC (SWD) cables. Commonly found on ARM Cortex development kits, thi...

SKU: AF-5673

A high-quality 5 Megapixel camera breakout designed for hobby-level microcontrollers like the RP2040 and ESP32-S series. The OV5640 sensor with a 120-degree wide-angle lens connects via an 8-bit parallel data interface, making it compatible with chips that have enough pins, DMA, and RAM to captur...

SKU: AF-3421 · MPN: 3421

The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to your microcontroller — eliminating analogue noise and the need for an ADC. With...

SKU: AF-2772 · MPN: 2772

The Feather M0 Basic Proto is the no-frills member of the Feather M0 family, built around the ATSAMD21G18 ARM Cortex M0 processor with a built-in prototyping area for soldering on extra components. With 256KB of flash and 32KB of RAM, it provides significantly more processing power than ATmega-ba...

SKU: AF-3458 · MPN: 3458

The Feather 328P brings the classic ATmega328P into the Feather ecosystem, running at 3.3V and 8 MHz. If you want to keep your existing Arduino code compatibility while taking advantage of the Feather form factor and its wide range of FeatherWing add-ons, this board is an excellent choice. With ...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-3658 · MPN: 3658

A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and similar platforms. Comes in a snap-open storage box. Nylon hardware is non-conduc...

SKU: AF-3405 · MPN: 3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-3591 · MPN: 3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-6482 · MPN: ADA6482

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, including thermostats, cold chain asset tracking, and gas or heat metering, and it can a...

SKU: AF-2970 · MPN: 2970

The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the black PCB version — identical specs to the white variant, just with a different-coloured flex strip for a more discreet look. Each LED is con...

SKU: AF-2969 · MPN: 2969

The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visible look. Ea...

SKU: AF-2959 · MPN: 2959

The Mini Skinny NeoPixel strip features 60 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-2949 · MPN: 2949

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-2954 · MPN: 2954

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the black PCB version — the lowest density option in the Mini Skinny range, ideal for longer runs where power efficiency and wider pixe...

SKU: AF-3243 · MPN: 3243

A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...

SKU: AF-6282 · MPN: ADA6282

This Feather-format development board combines Espressif’s ESP32-S2 Wi-Fi microcontroller with native USB, 4 MB of flash and 2 MB of PSRAM for compact IoT builds. It is well suited to Arduino or CircuitPython projects where you want low-cost 2.4 GHz Wi-Fi and plenty of memory for larger data buff...