All Products
Showing 41-56 of 56 products · 4 unavailable products hidden
Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 1300mm
·
The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...
Adafruit Proto Tripler PiCowbell for Pico and PicoW
·
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic
·
The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connect via STEMMA QT / Qwiic and start reading air quality data with no soldering req...
2.1mm to 1.7mm DC jack adapter
·
A small adapter that converts a standard 5.5 / 2.1 mm DC barrel plug into a 4.0 / 1.7 mm plug, letting you use common 2.1 mm wall adapters with devices that have a smaller 1.7 mm DC jack input. Key Features 2.1 mm Jack Input – Accepts standard 5.5 / 2.1 mm barrel plugs 1.7 mm Plug Output – Fi...
Adafruit BrainCraft HAT - Machine Learning for Raspberry Pi 4
·
The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...
3.5mm / 1.1mm to 5.5mm / 2.1mm DC Jack Adapter
·
A push-fit DC barrel jack adapter that converts a 3.5/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Simply push it onto the smaller plug until it clicks into place — no soldering or tools required. Key Features Click-Fit Connection – Push onto the plug until it clicks secure...
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
·
The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...
Adafruit LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic
·
The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses magnetic north — combine the two for a complete compass and orientation solution. ...
Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor
·
A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) and lux measurements up to 144 kLux, making it suitable for everything from dim ...
Maker Pi Pico Base - Raspberry Pi Pico Not Included
·
Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicator for convenient code testing and troubleshooting. The bottom of the board even ...
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
·
The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 temperature sensors or other 1-Wire devices. The 1-Wire protocol, originally de...
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
·
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a compact, all-in-one solution for weather stations, environmental monitoring, an...
JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
·
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable. It's helpful for using products like the JTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector. This ...
Adafruit TRRS Trinkey - USB Key for Assistive Technology
·
The Adafruit TRRS Trinkey is a USB-A plug-in microcontroller designed specifically for assistive technology. It combines an ATSAMD21 processor with a switched TRRS 3.5mm audio jack, connecting all 6 jack pins (tip, ring 1, ring 2, sleeve, plus tip switch and ring 1 switch) to analog-capable GPIO ...
Adafruit Sensirion SHT40 Temperature Humidity Sensor - STEMMA QT / Qwiic
·
The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor family, it delivers excellent measurement precision in a compact, easy-to-use breakou...
2.1mm to 2.5mm DC Barrel Plug Adapter
·
A simple adapter that sits inside a 5.5 / 2.5 mm DC barrel jack, allowing you to use a standard 5.5 / 2.1 mm barrel plug with it. Just insert the adapter into the device's 2.5 mm jack, then plug in your 2.1 mm power supply as normal. Key Features 2.5 mm to 2.1 mm Conversion – Adapts a 2.5 mm I...
