All Products

SKU: DF-SEN0251

This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code control. Compared with the earlier version of BMP180, BMP280, and BMP388, this sensor exhibits lower power consumption, higher resolu...

SKU: DF-DFR1103 · MPN: DFR1103

##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration period and accurately calibrates the onboard RTC chip. This calibration effectively...

SKU: DF-SEN0159

The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer lets you set a threshold for a digital on/off signal output. An onboard heating c...

SKU: DF-FIT0756

This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and digital sensors such as vibration sensors, tilt sensors, magnetic induction, et...

SKU: DF-DFR0469

A high-precision I2C real-time clock (RTC) module from DFRobot's Gravity series, based on the SD2405AL chip. It features an internal rechargeable battery that keeps time for 5–8 years without external power, making it ideal for data logging, alarm clocks, and any project that needs reliable timek...

SKU: DF-KIT0111

The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...

SKU: DF-SEN0223

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conductors, but also the human body, fruit, plants and other conductors. By touching the...

SKU: DF-FIT0896

Note: One package has 10 cables.This high-quality 30cm digital sensor cable is equipped with 3 pin PH2.0 plug connector on one side and Dupont male connector on the other side. One package has 10 cables. Compatible with breadboard and DuPont wire spacing, these cables use materials that are ...

SKU: DF-DFR0411

INTRODUCTION This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pin "gravity" interface saving lots of messy wiring. SPECIF...

SKU: DF-SEN0171

A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security systems, occupancy sensing, and automated lighting projects. The sensor operates ...

SKU: DF-DFR0018

This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. To connect these sensors to Arduino, we suggest to use our IO expansion shield...

SKU: DF-DFR0464

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...

SKU: DF-DFR0565

Gravity: Digital Signal Isolator is capable of isolating I2C digital signal and providing isolated power to the sensor module, effectively preventing mutual interference between the sensor modules. This digital signal isolator can be used for multi-parameter water quality detection systems to pre...

SKU: DF-SEN0475 · MPN: SEN0475

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industrial and environmental protection applications.The sensor includes integrated tempe...

SKU: DF-SEN0473

This is a sensor that detects hydrogen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen in the environment. Can be widely used in the detection of hydrogen in ...

SKU: DF-DFR0407

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagnetic sensor, and a 32-bit microcontroller running BSX3.0 FusionLib software. The B...

SKU: DF-DFR0785-Y · MPN: DFR0785-Y

This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual feedback for interactive projects.When pressed down, the module outputs High and th...

SKU: DF-FIT0897 · MPN: FIT0897

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...

SKU: DF-DFR1063 · MPN: DFR1063

The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gravity-compatible I/O interfaces — all in a tiny 47mm × 38.5mm form factor. A bu...