All Products

SKU: WS-20380

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, and RGB LEDs — all on a single board with no messy external wiring. Powered by t...

SKU: LB-LR07

A comprehensive collection of 37 different sensors and modules for Arduino, covering a wide range of inputs and outputs for electronics projects. Everything comes neatly organised in a clear plastic storage case. From environmental sensing (temperature, humidity, light) to user input (joystick, ...

SKU: EC-SPS40201S

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel outputs a low (TTL 0) signal and its indicator LED lights up. Each channel has an onbo...

SKU: EF-EF04089

Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared to traditional 4-wire ultrasonic modules. With a measurement range of 4–400cm an...

SKU: DF-DFR1219 · MPN: DFR1219

This compact solid-state LiDAR module gives robots and automation gear short-range obstacle awareness without the moving parts of a mechanical scanner. It covers 70mm to 1000mm with an 85° field of view and 0.54° angular resolution, making it suited to AGVs, service robots, vacuum cleaners and ot...

SKU: AF-979 · MPN: 979

The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to 254 inches with 1-inch resolution. Objects closer than 6 inches are reported as ...

SKU: DF-SEN0164

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface that blocked it, the phototransistor can pick up the signal for distance calcul...

SKU: EF-EF03435

An accessory pack for the ElecFreaks Ring:bit Car V2, adding obstacle avoidance, line-following, and colourful LED lighting to your micro:bit-powered car. The kit includes three modules that plug directly into the Ring:bit Car for expanded functionality. What's Included Sonar:bit (Ultrasonic S...

SKU: LB-LR0062

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of 2-30 cm at an angle up to 35 degrees.The detection distance can be changed by u...

SKU: DF-SEN0547

The LD19 is a compact 360° DTOF (Direct Time-of-Flight) LiDAR sensor with a ranging distance of up to 12 metres. It provides high-frequency environmental scanning for autonomous mapping, obstacle detection, and navigation. The sensor resists ambient light up to 30 kLux, enabling reliable operatio...

SKU: PL-136

The Sharp GP2Y0A21YK0F is an infrared distance sensor that outputs an analogue voltage corresponding to the distance of the nearest object within its 10–80 cm detection range. Using IR triangulation, it provides reliable distance measurements independent of the target object's colour or reflectiv...

SKU: DF-MBT0044-1 · MPN: MBT0044-1

This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...

SKU: AF-2442 · MPN: 2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: LB-LS2209

A mounting bracket designed to attach an HC-SR04 ultrasonic ranging module and an analogue servo to a smart car chassis. Enables pan-and-scan obstacle detection for robotics projects. Key Features HC-SR04 Compatible – Mounts the popular ultrasonic ranging module Servo Mount – Attaches to a st...

SKU: DF-SEN0599 · MPN: SEN0599

An underwater ultrasonic obstacle avoidance sensor designed specifically for submerged applications. With an IP68 protection rating and a measurement range of 5–600 cm, it enables underwater vehicles to detect and avoid obstacles without relying on cameras or human observation. Operating on a wi...

SKU: LB-BIRDBIT

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn graphic programming and block style coding in an entertaining way that nurtures...