All Products

SKU: DF-SEN0565

Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sens...

SKU: AF-6136 · MPN: ADA6136

Add a slim, flexible line of ice blue light to props, miniatures and maker projects with this LED filament from Adafruit's nOOds range. It is made from dozens of micro LEDs bonded to an ultra-flexible metal backing and protected with colourful silicone.These filaments are commonly used for Edison...

SKU: DF-SEN0574

Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery....

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: LB-LS0299

This multifunctional third hand soldering stand combines adjustable crocodile clip clamps, LED lighting, and a dual magnifying lens to keep your hands free while soldering, assembling, or inspecting small components. The weighted base with a steel plate provides extra stability, and it can be po...

SKU: SF-TOL-09317

This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but soldering flat on a table works just fine. Then again, the desk is starting to loo...

SKU: AF-3444 · MPN: 3444

The Adafruit DotStar High Density 8×8 Grid packs 64 individually addressable RGB LEDs into a compact 25.4 mm × 25.4 mm (1" × 1") square. Each DotStar pixel features a built-in PWM driver and is controlled via a 2-wire SPI interface using just two digital I/O pins — data and clock. Each LED deliv...

SKU: PL-1013 · MPN: 1013

This connector is a single-row, 3-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of five.

SKU: AF-1195 · MPN: 1195

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have.Inside t...

SKU: LB-LS0784

Multi-function&nbsp;Silicone Heat Insulation Mat Features circuit board location A&nbsp;screw location 3 parts compartments with cover A magnetic tools area 3 magnetic parts areas 7 non-magnetic parts areas A scale ruler 42 spare cells Screw Location with 124 tiny cells Resistance to high temp...

SKU: AF-1728 · MPN: 1728

A charming sew-your-own owl craft kit by Cynthia Treen Studio. Designed for beginner adults and competent young stitchers, the kit includes all materials and step-by-step instructions to create a small stuffed owl approximately 3.5" (9 cm) tall. Cynthia Treen Studio uses locally sourced and recy...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: DF-SEN0566

Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. ...

SKU: AF-4468 · MPN: 4468

This miniature 5 V cooling fan keeps small computers, FPGAs, motor drivers, and other heat-generating components cool. It features a Molex PicoBlade 1.25 mm pitch 2-pin connector for easy plug-in attachment to compatible board headers, or you can cut the connector off and solder or clamp the wire...

SKU: JU-JU-W-LP334 · MPN: JU-W-LP334

You tried to follow the pattern. You really did.&nbsp;This pin is for anyone who’s ever cut the wrong size, lost their last needle, or discovered that yes, glue absolutely does dry faster when it shouldn't.&nbsp;Perfect for makers with a mouth and a sense of humour.&nbsp;This colourful, gold-back...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: LB-LR0536

An aluminium mechanical robotic arm frame kit with 6 degrees of freedom and a claw gripper. This is a hardware-only kit — servos are not included — giving you the flexibility to choose your own servo motors based on your project requirements. Key Features 6 Degrees of Freedom – Full range of m...

SKU: DF-SEN0571

Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor...

SKU: AF-1333 · MPN: 1333

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this sort of switch and have an LED as feedback (say, to indicate that an action is occ...

SKU: AF-5435 · MPN: 5435

A miniature traffic light standing 6.5 cm tall, featuring red, yellow, and green LEDs. Perfect for dioramas, model sets, dollhouses, and electronics learning projects. The LEDs are common anode — connect 3–6V to the black wire (anode) and ground through the red, yellow, or green wires to light ea...