All Products

SKU: SF-KIT-13708

The SparkFun Learn to Solder Simon Says kit combines a classic Simon Says game with a complete introduction to through-hole soldering. All components are through-hole, making it an excellent starting point for beginners. The kit includes everything needed to build the game — soldering iron, solde...

SKU: DF-TEL0146

In life, remote controllers can be seen everywhere, and most of them are inseparable from the battery. However, we often encounter problems when using the battery, for instance, it is troublesome to replace the battery, batteries are easy to corrode in a humid environment, or the waste batteries ...

SKU: WS-30315 · MPN: 30315

The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...

SKU: AF-1719 · MPN: 1719

Make a small linear display with multiple colors using this elegant bi-color LED bargraph. Only 1.2" long, it is quite visible but not so large it wont plug into a breadboard! 24 LEDs are contained in the plastic body, 12 red 14mcd and 12 13mcd green. Every bar has two LEDs inside so you can h...

SKU: EF-EF11085

A clear battery holder designed for the BBC micro:bit, holding two AAA batteries. Features a built-in on/off switch and a PH2.0 connector that plugs directly into the micro:bit's battery port. The transparent casing lets you see the batteries inside. Specifications Battery Type – 2× AAA (not i...

SKU: LB-LR07

A comprehensive collection of 37 different sensors and modules for Arduino, covering a wide range of inputs and outputs for electronics projects. Everything comes neatly organised in a clear plastic storage case. From environmental sensing (temperature, humidity, light) to user input (joystick, ...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: LB-LR0272

Stock up your parts drawers with this bulk pack of 500 diffused 3mm LEDs. It includes 100 each of red, green, blue, white and yellow LEDs, giving you a handy mix for indicators, models, craft builds and general electronics projects.The diffused lens helps produce a softer, more even light output ...

SKU: SF-COM-11408

This 20mm 4-digit 7-segment display in blue is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one decimal point per digit. Key Features 4-Digit 7-Segment – With decimal point ...

SKU: AF-2050 · MPN: 2050

A large 3.5" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 480×320 pixel display is driven by the HX8357D chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: LB-LS1610

These handy little pliers are great for you electronic and 3D printing need.  Use them for trimming and twisting.Pack contains 1 x Nose Plier1 x Wire Plier1 x Diagonal Plier

SKU: LB-00248

Mike Tooley's book will show you how the micro:bit can be used in a wide range of applications from simpe domestic gadgets to more complex control systems such as those used for lighting, central heating and security applications.  Using Microsoft Code Blocks, the book provides a progress...

SKU: DF-TOY0175-EN · MPN: TOY0175-EN

This hands-on STEM kit lets kids build a working RGB LED camping lantern while learning the basics of electronic circuits and the primary colours of light. By connecting the LED, rotary controls and battery pack with colour-matched wires, children can see how a simple circuit brings their project...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: DF-DFR0921

Has it ever happened to you that you spent a lot of time ascertaining a problem when making projects and finally found out it was just caused by loose wiring? Then, what you may need is a terminal block shield like this! The shield adopts terminal blocks to secure wires so as to make connections ...

SKU: SF-COM-29757 · MPN: COM-29757

This compact Schottky diode is designed for efficient rectification where low forward voltage, low leakage and fast switching are important.It suits circuits that need higher current operation in a small surface-mount part, including designs operating at higher temperatures above 85°C.The manufac...

SKU: SF-TOL-09317

This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but soldering flat on a table works just fine. Then again, the desk is starting to loo...

SKU: DF-ROB0128

The Devastator is a tracked tank-style mobile robot platform built from high-strength aluminium alloy. This version 2 features upgraded metal DC gear motors for improved speed, torque, and durability compared to the original plastic-motor design, along with a load capacity of up to 3 kg. The mod...

SKU: AF-1743 · MPN: 1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: SF-DEV-13343

The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make it more durable for wearable use, we’ve used a different style of reed switch, ...