All Products

SKU: AF-4650 · MPN: 4650

The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....

SKU: AF-4777 · MPN: 4777

Add a versatile grayscale eInk display to your Feather project with this 2.9" FeatherWing. The 296×128 pixel panel supports four levels of grey — white, light grey, dark grey, and black — giving you more visual depth than a standard monochrome display while refreshing in about one second, far fas...

SKU: AF-5709

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...

SKU: AF-3622 · MPN: 3622

Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera in FeatherWing form factor. The AMG8833...

SKU: AF-3249 · MPN: 3249

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing enables 8 concurrent DMA NeoPixel strands from a single Feather M0, with up to 250 pixels per strand (2,000 total) — all running in the background via hardware DMA so your code keeps executing. The wing hand...

SKU: AF-3106 · MPN: 3106

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in blue. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall blue 7-segment display with decimal points and a centre colon for clock displays. ...

SKU: AF-6054 · MPN: ADA6054

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape needed — the mount snaps directly onto brick baseplates for a clean, secure build. ...

SKU: AF-2772 · MPN: 2772

The Feather M0 Basic Proto is the no-frills member of the Feather M0 family, built around the ATSAMD21G18 ARM Cortex M0 processor with a built-in prototyping area for soldering on extra components. With 256KB of flash and 32KB of RAM, it provides significantly more processing power than ATmega-ba...

SKU: AF-3403 · MPN: 3403

The Feather M0 Express is Adafruit's CircuitPython-optimised Feather, built around the ATSAMD21G18 ARM Cortex M0+ processor. It combines the standard Feather M0 platform with 2 MB of SPI flash storage, a Mini NeoPixel, and a UF2 bootloader for drag-and-drop programming — no special tools or drive...

SKU: AF-3173 · MPN: 3173

A simple, solder-on terminal block set sized to fit Adafruit Feather boards and FeatherWings. These 0.1″ pitch terminal blocks let you make secure, screw-down wire connections without soldering wires directly to your board — making projects easier to build, maintain, and modify. Compatible with ...

SKU: AF-4814 · MPN: 4814

The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...

SKU: AF-4352 · MPN: 4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-3109 · MPN: 3109

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in white. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall white 7-segment display with decimal points and a centre colon for clock displays....

SKU: AF-3458 · MPN: 3458

The Feather 328P brings the classic ATmega328P into the Feather ecosystem, running at 3.3V and 8 MHz. If you want to keep your existing Arduino code compatibility while taking advantage of the Feather form factor and its wide range of FeatherWing add-ons, this board is an excellent choice. With ...

SKU: AF-2940 · MPN: 2940

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather ...

SKU: AF-2771 · MPN: 2771

The Feather 32u4 Basic Proto is the no-frills member of the Feather 32u4 family, with a built-in prototyping area where you can solder on extra components like buttons, sensors, or connectors without needing a separate breadboard. Built around the ATmega32u4 running at 8 MHz with 3.3V logic and ...

SKU: AF-1028 · MPN: 1028

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of col...

SKU: AF-4197 · MPN: 4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-3591 · MPN: 3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-5779 · MPN: ADA5779

This swirly aluminium mounting grid gives small maker boards a sturdy mechanical base when you are building plug-and-play projects with STEMMA QT boards, sensors, Feathers and other 0.1 inch-spaced PCBs.It is made using a single-sided aluminium-core PCB process, but there is no copper layer — jus...