All Products

SKU: AF-625 · MPN: 625

This electroluminescent (EL) panel produces an even, diffused glow across its entire 10 × 10 cm surface. It's the flat equivalent of EL wire — a flexible sheet of plastic coated with EL material that emits a soft, uniform white light (slightly blue-tinted when lit, pink when off). The panel is c...

SKU: AF-2133 · MPN: 2133

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...

SKU: LB-EAGLED-MOMENTARY

A pack of 10 low-profile momentary push buttons designed for e-textile and wearable electronics projects. Each button features large sewing holes and flat connection pads with no sharp edges, making them comfortable to wear and easy to sew onto fabric with conductive thread. The button closes th...

SKU: AF-1622 · MPN: 1622

A diffused white LED backlight strip in a 3.5 mm thick acrylic enclosure. Normally found behind LCDs, this module uses a single white LED with a specially designed acrylic diffuser to provide near-uniform illumination across the entire surface. A reflector on the back directs all light forward fo...

SKU: AF-5851 · MPN: ADA5851

This ultra-flexible LED strip packs 320 natural white SMT LEDs per metre into a slim 5 mm wide silicone-encased profile. The densely packed LEDs produce a smooth, continuous glow that resembles neon tubing — without expensive transformers or fragile glass. The thin silicone diffuser creates an ev...

SKU: AF-588 · MPN: 588

A starter pack containing 2.5 metres of high-brightness pink EL (electroluminescent) wire with a pocket inverter and soldering supplies. The EL wire comes pre-cut and soldered, ready to connect to the included battery-powered inverter for an instant neon-like glow. Key Features 2.5 m Pink EL W...

SKU: SF-COM-12645

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 600-610nm Orange 1.8-2.2VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 100-160 MCD output Documents: Datasheet LED Tutorial

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-6206 · MPN: ADA6206

A warm-white LED filament shaped as the letter "O", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6201 · MPN: ADA6201

A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-DFR0199-R

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of red LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smal...

SKU: AF-2217 · MPN: 2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-6207 · MPN: ADA6207

A warm-white LED filament shaped as the letter "P", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6196 · MPN: ADA6196

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: SF-ROB-26619 · MPN: ROB-26619

Build and program an XRP robot with a controller board designed for hands-on robotics learning, from beginner projects through to more advanced tasks. It brings together processing, motion control, sensors, wireless connectivity and expansion so students and makers can focus on building, coding a...

SKU: AF-6212 · MPN: ADA6212

A warm-white LED filament shaped as the letter "U", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...