All Products

SKU: AF-6251 · MPN: ADA6251

The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...

SKU: AF-5647

The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...

SKU: AF-3422 · MPN: 3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-4145

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay ...

SKU: AF-3351 · MPN: 3351

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input ca...

SKU: AF-6421 · MPN: ADA6421

The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...

SKU: AF-6250 · MPN: ADA6250

The Adafruit PCM5102 I2S DAC converts digital I2S audio into excellent stereo line-level output through a 3.5mm jack. With an impressive 112dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get audiophile-grade analogue audio out. The PCM5102 accepts...

SKU: LB-LS8359

Add simple sound output to your electronics project with this 3W speaker fitted with an XH2.54 wire connection.It is a handy choice for maker projects, audio alerts, small enclosures, toys, robots, and embedded builds where you need a basic wired speaker.Pair it with a suitable audio amplifier or...

SKU: AF-5882 · MPN: ADA5882

The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink required — providing plenty of power for LEDs, WiFi, displays, and small motors...

SKU: AF-2130 · MPN: 2130

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable and battery-powered audio projects. A significant upgrade over basic LM386-based...

SKU: AF-2264 · MPN: 2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: AF-4718 · MPN: 4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-5807 · MPN: ADA5807

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines to request a suitable PD voltage.You can configure it with solder jumpers for f...

SKU: AF-1313 · MPN: 1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.

SKU: AF-1891 · MPN: 1891

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value). We particularly like th...

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: AF-1897 · MPN: 1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-4800 · MPN: 4800

The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boards, and information displays that only need to update periodically. Designed fo...

SKU: AF-4197 · MPN: 4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-3657 · MPN: 3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...