All Products

SKU: AF-270 · MPN: 270

A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface temperatures in high-heat environments such as ovens, kilns, heaters, and industri...

SKU: DF-SEN0714 · MPN: SEN0714

This industrial-grade water quality probe measures blue-green algae, also known as cyanobacteria, in water using the fluorescence principle. The probe and housing are integrated into a single waterproof unit for straightforward deployment in rivers, lakes, ponds and other monitoring sites.It uses...

SKU: DF-SEN0707 · MPN: SEN0707

This industrial-grade water electrical conductivity sensor combines the probe and housing in one integrated unit for straightforward installation and reliable EC measurement. With an electrode constant of K=10, it is suited to higher-conductivity water monitoring across aquaculture, tap water, dr...

SKU: DF-SEN0604 · MPN: SEN0604

##Introduction The 4-in-1 soil sensor is designed to monitor key soil parameters: temperature, humidity, electrical conductivity (EC), and pH. With its wide voltage power supply range of 5-30V and RS485 data transmission using the reliable MODBUS-RTU protocol, this sensor delivers rapid, accurate...

SKU: DF-SEN0656 · MPN: SEN0656

The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and provides temperature readings with 0.25℃ resolution over a very wide measurement ...

SKU: DF-SEN0469 · MPN: SEN0469

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontroller and single-board computer projects.The probe is factory-calibrated for quick s...

SKU: SF-DEV-20594

The SparkFun DataLogger IoT - 9DoF is a preprogrammed data logger that automatically detects, configures, and logs Qwiic-compatible sensors — all without writing a single line of code. Simply plug in your sensors, power up, and start capturing data to a microSD card or send it wirelessly to your ...

SKU: DF-SEN0233

A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemical probe for formaldehyde detection, and an integrated sensor for temperature and...

SKU: DF-SEN0710 · MPN: SEN0710

Designed for industrial water-quality monitoring, this turbidity probe measures suspended particles using the 90° light scattering principle. The probe and housing are integrated into a compact IP68 unit, so it can be submerged for extended periods in applications such as drinking water treatment...

SKU: DF-SEN0475 · MPN: SEN0475

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industrial and environmental protection applications.The sensor includes integrated tempe...

SKU: AF-3245 · MPN: 3245

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare wires stainless-steel tip probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200°C, this one uses a fiberglass braid so...

SKU: DF-DFR0372 · MPN: DFR0372

This control board is designed for the DreamMaker Overlord 3D Printer, acting as the central controller for analysing sensor data and driving the actuators needed to complete the printing process.It is based on the Arduino Mega2560, providing plenty of GPIO resources for structure and motion-cont...

SKU: LB-LS4690-50CM

A waterproof DS18B20 digital temperature probe with a 0.5m cable and XH2.54mm connector. Ideal for monitoring temperatures in wet or harsh environments including aquariums, hydroponics, brewing, and outdoor weather stations. The DS18B20 is a popular one-wire digital temperature sensor that commu...

SKU: SF-SEN-13715

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is ...

SKU: DF-DFR0198

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get ...

SKU: AF-165 · MPN: 165

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert to temperature. Key Features Analog Voltage Output – Proportional to temperat...

SKU: DF-SEN0496

This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports single-point or double-point calibration for accurate readings in demanding enviro...

SKU: DF-SEN0161-V2

The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental water testing. The kit includes a laboratory-grade pH probe, a signal conversion b...

SKU: DF-SEN0205

A photoelectric liquid level sensor that uses optical principles to detect the presence or absence of liquid. With no moving parts, it requires minimal calibration and offers high sensitivity and long service life. The corrosion-resistant polycarbonate probe handles temperatures from −25 °C to 10...

SKU: DF-DFR0300

The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring water quality, nutrient levels in hydroponic systems, and soil salinity in agricultu...