All Products
Showing 1-20 of 53 products · 7 unavailable products hidden
SWD (2x5 1.27mm) Cable Breakout Board
·
This compact adapter board makes it easier to work with ARM development boards that use the slimmer 2x5 SWD programming connector. It is designed for 0.05 inch / 1.27mm pitch SWD cables, commonly found on small Cortex M0 and Cortex M3 boards.It is useful when connecting JTAG/SWD debugging tools s...
JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
·
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable. It's helpful for using products like the JTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector. This ...
10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long
·
A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boards. Key Features 1.27mm (0.05") Pitch – 2×5 box header connectors on both end...
MicroMod Main Board - Double
·
This Double Main Board is a carrier for SparkFun’s MicroMod ecosystem, letting one MicroMod Processor Board connect to up to two MicroMod Function Boards. The M.2 MicroMod connectors make it straightforward to align the keyed edge connectors and secure the boards with screws.USB-C is provided for...
Mini SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
·
A compact 1.27 mm (0.05") pitch 2×5 mini SWD box header with a half-shroud and key-notch. A smaller alternative to full-shroud SWD headers, taking up much less board space while remaining compatible with standard 10-pin 1.27 mm IDC (SWD) cables. Commonly found on ARM Cortex development kits, thi...
0.05" Pitch Thru-Hole Female Socket Header 2x5 10-pin
·
A compact 0.05" pitch (1.27mm) thru-hole female socket header in a 2×5 (10-pin) configuration. Originally designed for use with the PM2.5 Air Quality Sensor (PMSA003I) and its breakout board, this header is also handy for your own sensor and prototyping projects. These headers match standard SWD...
SWD 0.05 Pitch Connector - 10 Pin SMT Box Header
·
This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece of hardware with your own software. We're specifically selling it so you can solder it onto our nRF52 Feather to add SWD debu...
SWD Cable - 2x5 Pin
A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards. Specifications Length – 150mm (~6") Conductors – 10 Connectors – 2×5 pin fe...
Header - 2x5 Pin (Female, 1.27mm)
A compact 2×5 pin female through-hole header with 1.27 mm (50 mil) pitch. This is the standard configuration used for JTAG and SWD debugging connections on microcontroller boards. Specifications Configuration – 2×5 (10 pins total) Gender – Female Pitch – 1.27 mm (50 mil) Mounting – Through-...
2x5 Pin 1.27mm SMD Unshrouded Header
·
This compact unshrouded header provides a 2x5 pin connection in a fine 1.27mm pitch format, making it suitable for densely packed boards and small interconnects.It is an SMD header, so it is intended for surface-mount PCB layouts rather than through-hole mounting. The unshrouded design keeps the ...
IDC Breakout Helper - 2x5 (10 pin)
·
This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre of a breadboard and a male header that plugs into the top of the socket. A prac...
Terminal Block Breakout Module for Raspberry Pi Pico
·
A screw-terminal breakout module for the Raspberry Pi Pico, designed for industrial, robotics, and prototyping applications where secure, tool-free wiring is essential. Every GPIO pin is broken out to labelled terminal blocks, making it easy to connect sensors, displays, motors, and other periphe...
Pogo Pin Probe Clip - 2x5 1.27mm Pitch SWD
·
The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in springy pogo pins - so you can connect to a PCB with classic 'SWD' pad holes, without...
SparkFun OpenLog Data Collector with Machinechat - Base Kit
The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS / GNSS, s...
HDMI Plug Breakout Board
·
This HDMI plug breakout board lets you create custom HDMI cables or tap into individual HDMI pins for specialised wiring setups. The solid PCB features an HDMI plug with through-hole pads for soldering your own connections — ideal for splicing off I2C, power, or specific signal pins. Comes with ...
SparkFun MicroMod ATP Carrier Board
The SparkFun MicroMod ATP (All The Pins) Carrier Board breaks out every pin from the MicroMod M.2 connector to 0.1" female headers and PTH pads, giving you full access to your MicroMod Processor Board's capabilities. It's the ideal development and prototyping platform for evaluating different Mic...
Bus Pirate Cable
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...
Header - 2x5 Pin (Male, 1.27mm)
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
MicroMod GNSS RTK Carrier Board - ZED-F9P
·
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...
Adafruit ATSAMD09 Breakout with seesaw
·
The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...
