All Products

SKU: AF-3654 · MPN: 3654

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: AF-4681 · MPN: 4681

The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or other sensors without manual calibration or conversion. Packaged on a STEMMA QT...

SKU: AF-1756 · MPN: 1756

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...

SKU: AF-5323 · MPN: 5323

The Adafruit ESP32-S3 Feather with STEMMA QT brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. This version comes with 8 MB flash, 512 KB SRAM, and no PSRAM — suitable for ESP-IDF, Arduino, and lighter CircuitPython projects that don't require large ...

SKU: AF-6349 · MPN: ADA6349

The Adafruit INA238 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC, it delivers accurate measurements from microamps to 10A — all over a simple I2C...

SKU: AF-6420 · MPN: ADA6420

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m above sea level) with ±3 Pa relative accuracy (~±0.25 m) and ±30 Pa absolute ac...

SKU: AF-3231 · MPN: 3231

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868 MHz or 915 MHz) — perfect for sensor networks, remote monitoring, and bridging ...

SKU: AF-5800 · MPN: ADA5800

Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolutions, including square, round and bar-style displays that need continuous pixel...

SKU: AF-5673

A high-quality 5 Megapixel camera breakout designed for hobby-level microcontrollers like the RP2040 and ESP32-S series. The OV5640 sensor with a 120-degree wide-angle lens connects via an 8-bit parallel data interface, making it compatible with chips that have enough pins, DMA, and RAM to captur...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-6015

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required; simply snap the two pieces together over the Trinkey.It's...

SKU: AF-3090 · MPN: 3090

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...

SKU: AF-5975 · MPN: ADA5975

A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works with both 3.3V and 5V power. Two 3-pin JST SH (1 mm pitch) connectors allow ea...

SKU: AF-4285 · MPN: 4285

Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...

SKU: AF-5335 · MPN: 5335

The Adafruit CP2102N Friend is a USB-to-serial converter breakout featuring the Silicon Labs CP2102N chip with USB Type-C. It provides reliable serial communication at up to 3 Mbps, making it ideal for uploading firmware to Arduino, ESP8266, ESP32, and other microcontrollers that use an FTDI-styl...

SKU: AF-2883 · MPN: 2883

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, lightweight, and perfect for carrying in your pocket. All edge connectors remain ...

SKU: AF-2124 · MPN: 2124

The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB is connected, the battery charges automatically. Unplug USB and it seamlessly swi...

SKU: AF-5610 · MPN: 5610

The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configurable gain and integration time, it can measure from 0 to over 65,000 lux — suitab...

SKU: AF-5959 · MPN: ADA5959

The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an interesting alternative to a real-time clock for projects that need a separate, ind...

SKU: AF-4517 · MPN: 4517

The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading...