All Products

SKU: DF-DWG0004-S

A transparent acrylic mounting base for the DFRobot Romeo and Xboard Relay boards. The Star version features a decorative star-shaped cutout design, adding a distinctive look to your project while still providing board protection. The Star base can be paired with the Basic version as a bottom pl...

SKU: AF-1365 · MPN: 1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: DF-DWG0003

A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a clean, professional look. Made from high-quality double-sided frosted acrylic wi...

SKU: DF-DWG0005-B

Discontinued: This product has been discontinued. We recommend the Acrylic Romeo Base – Star as a suitable replacement. A transparent acrylic mounting base for the DFRobot Xboard Relay. The Basic version provides a flat, stable platform that protects the underside of your board from contact wi...

SKU: DF-DWG0005-U

A transparent acrylic mounting base for the DFRobot Xboard Relay. The Universe version features a decorative cutout pattern, adding a distinctive look to your project while still providing board protection. The Universe base can be paired with the Basic version as a bottom plate to create a sand...

SKU: SF-SEN-29259 · MPN: SEN-29259

Built around the Allegro ACS37800, this Qwiic power meter lets your project monitor voltage and current at the same time over I2C. It is designed for higher-demand loads such as 3D printers, UAVs and solar panels, with voltage monitoring up to 60VDC and current sensing up to 30A.The ACS37800 uses...

SKU: PL-2453

A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred at Vcc/2. The sensor offers a very low resistance current path (~0.6 mΩ) and el...

SKU: EC-SEL71220A

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly by an Arduino or other microcontroller via an analogue input pin. Key Features...

SKU: EC-SEL7125A

The ACS712 Current Sensor (5A) provides a simple way to measure AC or DC current up to ±5A. Based on the Allegro ACS712 Hall effect sensor, this module outputs a proportional analogue voltage that can be read directly by an Arduino or other microcontroller via an analogue input pin. With its low...

SKU: PL-1185

The ACS714 Current Sensor Carrier provides a compact breakout for Allegro's ±5A ACS714 Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS, making it ideal for safely monitoring current in a wide range of application...

SKU: PL-4049

The ACS724 Current Sensor Carrier provides a compact breakout for Allegro's ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS, making it suitable for high-current monitoring in motors, power s...

SKU: PI-TEK008

The Activating Origami Set from Teknikio lets you bring paper sculptures to life by adding simple electronic circuits. Start with a light or two, then build more complex modular systems with your origami creations. Add a small motor and see how it affects the movement of the sculpture based on wh...

SKU: LB-LR0288

A simple 5V active buzzer that generates a tone using its built-in oscillator. Just apply a DC voltage and it sounds — no additional signal generation or driver circuit required. Ideal for adding audible alerts, alarms, or feedback tones to Arduino and microcontroller projects. Key Features Ac...

SKU: SF-ROB-18591

The Actuonix PQ12-100-6-R is a micro linear actuator with a servo-compatible PWM interface. Weighing just 22 grams with a 20mm stroke, it delivers up to 50N (~5 kg) of force thanks to its 100:1 gear ratio — making it one of the most powerful actuators of its size. The PQ12-R series operates as a...

SKU: AF-5811 · MPN: ADA5811

This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy choice when you want finer output control than a typical 12-bit DAC can provide....

SKU: AF-3437 · MPN: 3437

A shiny blue lunchbox featuring the friendly AdaBot mascot. Whether you're heading to school, work, a Maker Faire, or the makerspace, this lunchbox is sure to turn heads. Fill it with snacks, electronics components, or a mix of both. Key Features AdaBot Design – Features the beloved Adafruit r...

SKU: AF-3371 · MPN: 3371

A limited edition enamel pin featuring AdaBot — the friendly, curious robot mascot from Adafruit. This minimalist black and white pin with a recessed lightning bolt detail looks great on backpacks, jacket lapels, lanyards, or anywhere you want to show your maker pride. Key Features Limited Edi...

SKU: AF-3128 · MPN: 3128

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in blue adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C m...

SKU: AF-3129 · MPN: 3129

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in green adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ...

SKU: AF-3130 · MPN: 3130

The Adafruit 0.54" Quad Alphanumeric FeatherWing Display in red adds a bright, 4-character 14-segment LED display to any Feather board. Each character can display letters, numbers, and symbols, making it ideal for clocks, status indicators, sensor readouts, and more. Driven by the HT16K33 I2C ma...