All Products
Showing 81-100 of 100 products
8-Channel EL Shield
An Arduino-compatible shield for controlling up to 8 channels of EL (electroluminescent) wire or tape. Each channel uses opto-isolated, zero-crossing control for safe and reliable switching. Control EL wire as simply as turning an LED on and off, or use PWM for colourful animated effects. Compat...
W5200 Ethernet Shield
The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...
Relay Shield v1.1
The Relay Shield v1.1 is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino/Crowduino through digital IOs with external 9V DC supply. Compared to...
Breadboard adapter for ESP8266 Serial-to-WiFi transceiver
A breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-Wi-Fi transceiver module. It converts the ESP-01's 2×4 pin header into two breadboard-friendly single-row headers with clearly labelled pin names, making prototyping with the ESP8266 much more convenient. The ESP-01 modul...
NRF24L01+PA+LNA Wireless Module - 1100 Meters
A long-range 2.4 GHz wireless transceiver module based on the NRF24L01+ chip with an integrated power amplifier (PA) and low-noise amplifier (LNA). The added PA and LNA significantly extend the effective communication range up to 1100 metres in open-air line-of-sight conditions. Connects via SPI ...
1 Channel RF Remote Control Module DC 5V
A single-channel latching relay module with a 433 MHz RF wireless remote control, powered by DC 5 V. The relay can be toggled via the included two-button wireless controller at distances up to 30 metres, and can also be controlled directly by a microcontroller via the standard interface. The mod...
RS232 To TTL Converter Module MAX3232
This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port. It is applicable to a variety of platforms including Arduino / AVR / ARM. For A...
ST-LINK V2 Emulator and Debugger
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...
ESP32-WROVER Burning Testing Mini System development Board for ESP-WROOM-32/ ESP-32S/ ESP32-WROVER
This mini system development board serves as both a burning/programming fixture and a minimum system board for ESP32 modules. It's compatible with ESP-WROOM-32, ESP-32S, and ESP32-WROVER modules, with all I/O ports broken out for full access during development and testing. Use it as a standalone...
NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module
The NodeMCU R2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module), featuring a CP2102 USB-to-UART bridge for reliable programming and debugging. It integrates GPIO, PWM, I2C, 1-Wire, and ADC on a single breadboard-friendly board, and can be programmed with the Arduino IDE or NodeM...
433MHz RF Transceiver CC1101 Module
A low-cost sub-1 GHz RF transceiver module based on the Texas Instruments CC1101 IC, designed for low-power wireless communication. Pre-configured for 433 MHz operation, it is well suited for ISM and Short Range Device (SRD) applications with a transmission range of 300–500 metres depending on en...
NodeMCU V2 ESP8266 Development Board
The NodeMCU V2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module) with an on-board PCB antenna and USB programming interface. It supports 802.11 b/g/n wireless networking and can operate in STA, AP, or STA+AP modes with a built-in TCP/IP stack supporting up to 5 simultaneous TCP c...
433Mhz Serial RF Module HC-12 (1000M)
The HC-12 is a multi-channel embedded wireless serial port module operating in the 433.4–473.0 MHz band. With up to 100 mW (20 dBm) transmit power and −117 dBm receiving sensitivity, it achieves communication distances of up to 1,000 metres in open space at 5,000 bps air baud rate. A built-in MC...
Bluetooth Low Energy Module HM11- CC2541
The HM-11 is a Bluetooth Low Energy (BLE 4.0) module based on the TI CC2541 microprocessor. It provides wireless communication with smartphones, tablets, desktop computers, and other embedded systems via a simple UART serial interface with AT command control. The XBee-compatible form factor makes...
Tiny RTC For Arduino
This tiny RTC module is based on the clock chip DS1307 which supports the I2C protocol. It uses a Lithium cell battery (CR1225). The clock/calendar provides seconds, minutes, hours, day, date,month, and year information. The end of the month date is automatically adjusted for months with fewer th...
Load Cell Straight Bar- 200kg
A 200 kg straight bar load cell with a cantilever beam structure designed for both tensile and compressive force measurement. The low-profile, high-strength design features a dust-proof sealed construction for reliable, stable performance in weighing and industrial measurement applications. Key ...
MTH02 Digital Temperature Humidity Sensor
Japan's Hokuriku resistive humidity sensor production as a Temperature & Humidity sensor.Application Idea Test and testing equipment; Automatic control; Weather station; Humidity regulator; Features Measure the relative temperature and humidity sensor (humidity range 18% - 98% temperature range -...
RTC EEPROM Module DS3231 AT24C32
DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike ...
ACS712 Current Sensor- 20A
A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly by an Arduino or other microcontroller via an analogue input pin. Key Features...
434Mhz Serial RF Module HC-11 (1-40M)
The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internally — simply send serial data in and it appears wirelessly at the receiving module...