All Products
Showing 61-80 of 100 products
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
RS232 Connector Expansion Shield for LattePanda V1
An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communication in demanding environments. Uses a stackable connection with copper standof...
RS485 Connector Expansion Shield for LattePanda V1
An industrial-grade RS485 expansion shield designed specifically for the LattePanda V1. This shield adds a reliable, isolated RS485 interface (via OPEN4) with comprehensive protection including signal isolation, power isolation, lightning surge protection, and transient voltage suppression — keep...
SparkFun Qwiic WiFi Shield - DA16200
Ultra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped R...
Ethernet and PoE Shield for Arduino - W5500 Chipset
The W5500 Ethernet expansion board is a new member of the DFRobot Ethernet family. It integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects.The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connec...
RS232 Connector Expansion Shield for LattePanda Alpha&Delta
An industrial-grade RS232 expansion shield designed for the LattePanda Alpha and LattePanda Delta. Adds a 9-pin D-Sub (DB9) male RS232 port using an FTDI USB-to-serial chip with an isolated transceiver module for reliable data transmission in demanding environments. The stackable design mounts o...
RS485 Connector Expansion Shield for LattePanda Alpha&Delta
This industrial-grade RS485 shield from DFRobot is specially designed to expand two parallel RS485 ports (terminal) with high reliability for LattePanda Alpha and LattePanda Delta. Employing FTDI USB to serial port chip and industrial-grade isolated transceiver module, the shield comes with the c...
MyoWare 2.0 Cable Shield
The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away from the board; this is where the MyoWare 2.0 Cable Shield comes in. The shield inc...
Arduino Sensor Shield Expansion Board v5
Build your electronics projects easier than ever with the use of this sensor shield expansion board. It makes connecting many input devices and output devices to the correct Arduino pins. This great board definitely comes in great quality and at an amazing price. A must-have for your electroni...
SparkFun USB-C Host Shield
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, digital cameras, Bluetooth dongles, game controllers, and more. This version up...
Crack the Code Shield
Perfect for both classroom undertakings and those new to Arduino! Designed to seamlessly plug into any standard Arduino or compatible board, this shield serves as an excellent tool. Originally conceived for workshops catering to a diverse audience including youngsters, families, adults, educa...
Single Crack the Code Arduino with Crack the Code Shield and Case
A single replacement kit for the Crack the Code unit of work. If you're already running the Crack the Code program in your classroom and need to replace or add an individual unit, this kit contains everything needed for one student station. Package Contents 1× Little Bird Arduino R3 Board 1× US...
Motor shield for Raspberry Pi
A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an...
FireBeetle Covers-Gravity I/O Expansion Shield
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types o...
Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD
·
The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...
2x2A DC Motor Shield For Arduino
The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...
Arduino Xbee Shield
An XBee-compatible shield for Arduino that supports a wide range of wireless communication modules including ZigBee, WiFi, and Bluetooth 2.0/4.0 bee-format boards. Stacks directly onto Arduino Uno, Leonardo, or Mega, with a built-in 5 V to 3.3 V level converter for safe interfacing with 3.3 V mod...
Prototyping Shield for Arduino
This is the very first prototyping shield for Arduino in the market since 2010. It comes with prototyping area that you can sold led , switch or other components, it also comes with a mini Arduino breadboard that can stick on the prototyping shield that make the project look tidy and fancy. The ...
Adafruit 1.8 Color TFT Shield w/microSD and Joystick
·
The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...
Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
·
The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phone and device — it can read and write to NFC/RFID tags and cards of Type 1 throug...
