All Products
Showing 61-80 of 91 products
Adafruit SHARP Memory Display Breakout - 2.7 400x240 Monochrome
·
The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and higher resolution make it ideal for detailed information displays, showing crisp...
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
·
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...
Adafruit Prop-Maker FeatherWing
·
The Adafruit Prop-Maker FeatherWing is an all-in-one add-on for building light sabers, cosplay props, interactive toys, and wearable effects. It combines NeoPixel LED driving, a 3W RGB LED driver, a motion-sensing accelerometer, and a Class D audio amplifier onto a single Feather-format board — e...
Adafruit Ethernet FeatherWing
·
Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and you're connected. Built around the WIZ5500 Ethernet controller, this FeatherWi...
Adafruit Feather 32u4 RFM95 LoRa Radio - 868 or 915 MHz
·
The Feather 32u4 RFM95 LoRa Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer range than standard packet radio — over 2 km line-of-sight with default settings ...
Adafruit Feather 32u4 RFM96 LoRa Radio - 433MHz
·
The Feather 32u4 RFM96 LoRa Radio (433 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver operating at 433 MHz, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer range than standard packet radio — over 2 km line-of-sight with ...
Adafruit Feather 32u4 Adalogger
·
The Feather 32u4 Adalogger is an all-in-one datalogger built around the ATmega32u4, with a built-in MicroSD card holder, USB connectivity, and LiPo battery charging. Ready to log data straight out of the box — just add a MicroSD card and start recording. The ATmega32u4 runs at 8 MHz with 3.3V lo...
Adafruit Feather 32u4 Basic Proto
·
The Feather 32u4 Basic Proto is the no-frills member of the Feather 32u4 family, with a built-in prototyping area where you can solder on extra components like buttons, sensors, or connectors without needing a separate breadboard. Built around the ATmega32u4 running at 8 MHz with 3.3V logic and ...
Teensy 3.x Feather Adapter
·
The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...
NeoKey FeatherWing - Two Mechanical Key Switches with NeoPixels
·
The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gateron, etc.) without soldering, using Kailh hot-swap sockets. A reverse-mount Ne...
Adafruit eInk Feather Friend with 32KB SRAM
·
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...
Adafruit FeatherWing 128x64 OLED Add-on
·
Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset button, so you can build compact menus, status displays, and handheld interfaces ...
TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers
·
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI. Comes fully assembled with dua...
Adafruit eInk Breakout Friend with 32KB SRAM
·
The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any development board via SPI. Unlike basic breako...
Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller
The Adafruit RP2040 CAN Bus Feather combines the powerful RP2040 microcontroller with an MCP25625 CAN controller and transceiver, giving you a ready-to-go CAN Bus interface in the compact Feather form factor. No soldering is needed to get started — just connect your CAN Bus lines to the included ...
Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier
The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making toolkit — I2S audio amplifier, NeoPixel driver with level shifting, accelerometer, ...
USB Host FeatherWing with MAX3421E
·
Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...
Adafruit Joy FeatherWing for all Feathers
·
The Adafruit Joy FeatherWing adds a 2-axis joystick and five buttons to any Feather board over I2C — no GPIO or analogue pins consumed. Using Adafruit's Seesaw technology, an onboard helper microcontroller reads the joystick and button inputs and presents them as a clean I2C interface, compatible...
Adafruit AMG8833 IR Thermal Camera Breakout
·
Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera you can integrate into any microcontroller or Raspberr...
Adafruit RGB Matrix Featherwing Kit - For M0 and M4 Feathers
·
The Adafruit RGB Matrix FeatherWing Kit lets you drive HUB75-type RGB LED matrices from any SAMD21 M0 or SAMD51 M4 Feather board. With built-in power regulation and a compact form factor, it's the easiest way to create colourful scrolling displays and LED wall projects using the Feather ecosystem...