All Products
Showing 7321-7340 of 11445 products
Neurodivergent Lapel Pin
·
You are not typical, you are not the same as everyone else, and that’s what makes you special. You are passionate, and bold and unique and wonderful.You are Neurodivergent!This colourful, gold-backed, hard enamel lapel pin comes beautifully presented on a Jubly-Umph backing card. It is one of a l...
Neuron Mic Speaker Block
Description: Use the Mic & Speaker block to play a sound, or to record your voice. Features: Store your record; Multiple built-in sound effects; Supports AI voice recognition via the Makeblock Neuron app; Supports offline operation when connected to Wi-Fi block; The magnetic design at ...
Neuron Power Block
Description:Powers the other blocks. Connect and press to power on. Press and hold for 3 seconds to power off. Description Figure: Features:The magnetic design at the back of Neuron blocks makes you can simply place your gadget on the magnetic surface such as whiteboard;The redesigned m...
Neutis Development Kit
The Neutis Development Kit from Emlid is a quad-core system-on-module (SoM) development platform based on the Neutis N5 module. It runs a Yocto-based Linux BSP with an up-to-date kernel, powered by a 64-bit ARM Cortex-A53 CPU and ARM Mali450 MP2 GPU. The development board provides easy access to...
NEZHA Inventor's kit for micro:bit( without micro:bit board )
Based on Planet X sensors, Nezha Inventor's Kit is designed for BBC micro:bit. It contains multiple sensors, ultrasonic sensor, crash sensor, line-tracking sensor, etc., and also with over 400 pieces of bricks. We plan to write 36 cases for this kit in our wiki aiming to cultivate and inspire kid...
Nezha Pro micro:bit Breakout Board
The ELECFREAKS Nezha Pro is a micro:bit expansion board designed for education and creative programming. It features a 4-way motor driver, 8 sensor expansion ports, and two built-in motor control buttons that work even without a micro:bit connected. All interfaces use RJ11 connectors with an anti...
NFC Card Tag (MIFARE Classic 13.56MHz/1K S50)
This is a MiFare Classic card - often used for electronic locks or customer identification. The tag contains an NXP S50 chip and an antenna and is passively powered by the reader/writer when placed a couple of inches away. Can be used with NFC Shield.Specification 1 KiloByte (8 KiloBit) non-volat...
NFC Classic Sticker
NFC classic sticker (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. ...
NFC/RFID breakout Module
The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a N...
NFC Shield
NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon RFID systems by allowing two-way communication between endpoints. Compared with...
NFC Tag - Clear Diamond (MIFARE Classic 13.56MHz/1K S50)
This is a MiFare Classic keychain fob - often used for electronic locks or customer identification. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. Can be used with NFC Shield.Specification 1 KiloByte (8 KiloBit) non-...
NFC Tag (Round)
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-...
Nicla Voice
The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, leveraging bio-inspired, advanced machine learning to automate complex tasks. Ni...
Night Camera Module for Raspberry Pi
A high-performance night vision camera module for Raspberry Pi, built around the Sony IMX327 STARVIS sensor. Designed for excellent low-light imaging without infrared fill light, this 2MP module delivers 1080p video at 30fps with built-in ISP, 2D/3D noise reduction, and anti-fog capabilities. Co...
Night vision camera module for Raspberry Pi - 70°
Light up the night with this night vision camera module with infra-red LEDs, for Raspberry Pi! Available with ether a standard (70°) or a wide-angle (160°) lens, this camera has IR LEDs that allow the camera to see in the dark without producing visible light. The camera itsel...
Night Vision Fisheye Camera 5MP
The Night Vision Fisheye Camera 5MP OV5647 is a high-quality camera that offers a 95-degree focal adjustment for clear, precise images. It also features night vision capabilities for clear images even in low-light conditions. This camera is perfect for capturing detailed images and videos, ...
Nikon F-Mount to C-Mount Lens Adapter for Raspberry Pi HQ Camera
This adapter allows you to mount your Nikon F-Mount lens onto the Raspberry Pi High-Quality Camera!The package includes the F-mount to C-mount lens adapter, C-CS mount lens adapter ring and dust cap/cover. The adapter supports focus to infinity, full manual control, manual focus, apertu...
Nimbus the Cloud - Internet of Things- Sticker!
·
You made an "Internet of Things" project! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the many ways to show and share.Th...
No-Clean Solder Wick #3 - Green
·
This pre-fluxed copper desoldering braid is made for removing solder from joints, pads and small mistakes like solder bridges. Place it over the solder, heat it with your soldering iron, and the activated flux plus the braid’s capillary action draws molten solder into the wick.It is handy for rew...
No-Clean Solder Wick #4 Light Blue - 2.5mm x 5ft
·
This desoldering wick is a pre-fluxed copper braid for removing solder from joints, fixing excess solder, and cleaning up solder bridges. It is a handy bench consumable for rework, repairs, and swapping components on PCBs.To use it, place the braid over the solder joint and apply your soldering i...
