All Products
Showing 41-60 of 69 products
Adafruit Mini Relay FeatherWing - Latching
·
The Adafruit Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the latching version, which u...
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
·
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...
Infrared Sensor Jumper Wire - 3-Pin JST
Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness. If you need this cable and ...
Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit
·
The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET motor...
Pololu Ball Caster with 1" Plastic Ball and Ball Bearings
This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older version for all applications that are not somehow specifically tied to the previous design.This ball caster kit includes a two-part black ABS housing, a 1″...
Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K
·
The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts to share a single data line — ideal for multi-point temperature measurement. The...
Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016
·
A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your...
OLED Breakout Board - 16-bit Color 1.27 w/microSD holder
·
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.27" diagonal and contains 128x96 RGB ...
Stereo 2.1W Class D Audio Amplifier - TPA2012
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...
SparkFun Qwiic Cable Kit
The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and ...
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface
·
The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...
OLED Breakout Board - 16-bit Color 0.96 w/microSD holder
·
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 0.96" diagonal and contains ...
Blinkt!
Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! Inspired by Alex Ellis' work with his Raspberry Pi Zero Docker Cluster, we developed these boards for him to use as status indicators. Blinkt! offers e...
Stereo 3.7W Class D Audio Amplifier - MAX98306
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...
Picade
A stylish, retro, and fun arcade cabinet for your Raspberry Pi.The Picade comes in kit form for you to build at home. All parts, panels, and components are included - you just need to supply the Raspberry Pi! We highly recommend using a Raspberry Pi 2 as the extra processing power gives great per...
The XL741 Discrete Op-Amp Kit
Build a working transistor-scale replica of the classic and ubiquitous analog workhorse. The "XL741" Discrete Operational Amplifier kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the μA741 op-amp integrated circuit, the classic and ubiquitous ana...
The Three Fives Kit: A Discrete 555 Timer
Re-create one of the most iconic chips in electronics history. The Three Fives Kit from Evil Mad Scientist Laboratories is a faithful, functional transistor-scale replica of the classic NE555 timer IC — built up from individual resistors, 2N3904 and 2N3906 transistors on an oversized PCB shaped l...
STEMMA Wired Tactile Push-Button Pack - 5 Color Pack
·
Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pre...
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
·
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...
Adafruit SHARP Memory Display Breakout - 2.7 400x240 Monochrome
·
The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and higher resolution make it ideal for detailed information displays, showing crisp...
