All Products
AI Overview
Here are the main Pololu options that match this search, grouped by common use:
Motor drivers (Raspberry Pi / Arduino)
- For Raspberry Pi and higher-current brushed DC motors: Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled) — up to 14A continuous/channel, up to 24V ($113.30).
- For Raspberry Pi and smaller motors: Dual MAX14870 Motor Driver for Raspberry Pi — 4.5–36V, up to 1.7A continuous/channel ($31.50).
- For Arduino motor control in shield form factor: Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino — dual high-power H-bridges for brushed DC motors ($94.50).
Power (step-down regulators)
- For regulated 5V rails from higher-voltage batteries/supplies: Pololu 5V, 2.5A Step-Down Voltage Regulator D24V22F5 — up to 36V input, 2.5A ($45.00).
- For regulated 12V output: Pololu 12V, 2.2A Step-Down Voltage Regulator D24V22F12 — up to 36V input, 2.2A ($27.95).
Motors & motion hardware
- Geared motor with feedback: 34:1 Metal Gearmotor 25Dx52L mm HP 12V with 48 CPR Encoder — 12V, 34:1 gearbox, 48 CPR quadrature encoder ($74.15).
- Small robot wheels: Pololu Wheel 40x7mm Pair - Red — 40mm diameter, press-fit for 3mm D-shafts ($9.10).
- Motor mounting: Pololu Micro Metal Gearmotor Bracket Extended Pair — mounting bracket set for Pololu micro metal gearmotors ($8.30).
- Caster support: Pololu Ball Caster with 1" Plastic Ball and Ball Bearings — ball caster for small robot chassis ($19.50).
- Shaft/wheel coupling hubs: Pololu Universal Aluminum Mounting Hub for 5mm Shaft, #4-40 Holes (2-Pack) — 5mm shaft hubs ($19.60); Pololu Universal Aluminum Mounting Hub for 8mm Shaft, M3 Holes (2-Pack) — 8mm shaft hubs ($14.25).
Sensors & switching
- Gas sensor carrier: Pololu Carrier for MQ Gas Sensors (Bare PCB Only) — breakout/carrier for MQ-series gas sensors ($2.25).
- Relay switching modules: Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit) ($4.00), Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled) ($9.95), and Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled) — 2-channel SPDT ($17.05).
What type of Pololu part are you looking for?
Collections
Showing 41-60 of 252 products
200:1 Plastic Gearmotor, 90º Output
A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...
Tamiya Plug with 10cm Leads, Female
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads...
1000:1 Micro Metal Gearmotor HPCB 6V
A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power 6V brushed DC motor with long-life carbon brushes (HPCB). The carbon brushes offer significantly longer motor life compared to the precious metal brush (HP) version, while delivering the same performance. ...
QTR-L-1A Reflectance Sensor (2-Pack)
The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for edge detection and line following. The reflectance measurement is output as an a...
Tube - Aluminum (1OD x 16L x 0.82ID)
These 16" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center.
RGB LED Satellite Module 004 (Circle)
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your next project.
CP2102N USB-to-Serial Adapter Carrier
This compact USB-to-serial adapter lets you easily connect TTL serial devices to a computer, where it appears as a virtual COM port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge, providing access to all control signal pins and GPIO pins. It serves as a conveni...
99:1 Metal Gearmotor 25Dx54L mm LP 6V
A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearbox face plate. The low-power variant draws less current than the HP version, mak...
99:1 Metal Gearmotor 25Dx54L mm HP 6V
A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearbox face plate. Also available with an integrated encoder for closed-loop contro...
378:1 Metal Gearmotor 25Dx58L mm LP 6V
This Pololu 25D metal gearmotor combines a low-power 6V brushed DC motor with a 377.93:1 metal spur gearbox. The high gear ratio delivers substantial torque at low speed, making it well suited for applications that need strong, controlled movement rather than high RPM. The gearmotor uses the sta...
Mini Tamiya Plug with 10cm Leads, Male
This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male mini Tamiya connector has 10 cm...
12V Step-Up Voltage Regulator U3V16F12
The Pololu U3V16F12 is a compact switching step-up (boost) voltage regulator that generates a fixed 12V output from input voltages as low as 1.3V (after start-up). It handles continuous input currents up to approximately 1.5A with a typical efficiency of 85–95%, making it ideal for battery-powere...
T1 (3mm) Red LED with Red Diffused Lens
This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.
Premium Jumper Wire 10-Pack M-F 12 Blue
These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. These 12″ (30 cm) wires have blue insulation and ship in packs of 10.
ACS714 Current Sensor Carrier -5A to +5A
The ACS714 Current Sensor Carrier provides a compact breakout for Allegro's ±5A ACS714 Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS, making it ideal for safely monitoring current in a wide range of application...
MinIMU-9 Gyro, Accelerometer, and Compass
This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resistant to audio noise and vibrations. The new version is also 25% smaller than the...
3-AA Battery Holder, Enclosed with Switch
An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...
Vishay TSOP34156 IR Receiver Module, 56kHz
The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tuned for a 56 kHz carrier frequency. This is the IR receiver used in the Polo...
Carbon Monoxide Flammable Gas Sensor MQ-9
This semiconductor gas sensor detects the presence of Carbon Monoxide at concentrations from 10 to 1,000 ppm and combustible gas from 100 to 10,000 ppm. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
Dual MAX14870 Motor Driver for Raspberry Pi
Control two brushed DC motors directly from your Raspberry Pi with this dual motor driver featuring MAX14870 H-bridge ICs. Capable of handling motors from 4.5V to 36V with up to 1.7A continuous per channel, it's perfect for robotics and motorised projects. This assembled version comes with heade...
