All Products

SKU: AF-5906 · MPN: ADA5906

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers required. It also adds LiPo battery charging, a power switch, reset button, STEMMA QT ...

SKU: AF-5963 · MPN: ADA5963

The Adafruit 555 PWM Output STEMMA is a fully assembled 555 timer board that generates an adjustable square-wave PWM signal — no breadboard wiring or external components needed. An onboard trimmer pot lets you tune the frequency across two selectable ranges: approximately 1.5 KHz to 25 KHz, or 1....

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: LB-LS6069

This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...

SKU: AF-5986

This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a practical choice for embedded audio projects, displays, and interactive installati...

SKU: AF-6091 · MPN: ADA6091

The Adafruit bq25185 Charger is a versatile LiPo/LiIon/LiFePO4 charging board that supports USB, DC, and solar power input. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, offering multi-chemistry support, adjustable charge rates, smart power path management, and near-MPPT so...

SKU: AF-6092 · MPN: ADA6092

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, combining power path management and regulated output in a single board. Con...

SKU: AF-6106 · MPN: ADA6106

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V supply from a single-cell LiPo battery, eliminating the need for a separate voltag...

SKU: AF-6071 · MPN: ADA6071

This panel mount cable is great for making USB Host or (some) client connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the other end has power, ground and D+ / D- lines. We particularly like that the panel mount part is very small, only about half an i...

SKU: AF-6153 · MPN: ADA6153

USB-C Panel Mount Cable – Compact & Easy InstallationThis USB Type-C panel mount cable is perfect for adding a USB-C connection to your project enclosure. The compact panel-mount side features a USB-C jack, while the other end provides power, ground, D+/D-, and CC1/CC2 lines for quick integration...

SKU: AF-3287 · MPN: 3287

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...

SKU: AF-3286 · MPN: 3286

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...

SKU: SF-COM-10795

Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a ribbon. These can be driven with...

SKU: SF-COM-10800

Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a panel. Panels are particularly wel...

SKU: AF-4026 · MPN: 4026

The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidation issues and won't introduce DC currents into your plants. The ATSAMD10 microco...

SKU: AF-4352 · MPN: 4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-5066 · MPN: 5066

Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter featuring a fully clear plastic body. This sensor sits in line with your water line and uses a pinwheel sensor to measure how much liquid has moved through it. The pinwheel has a lit...

SKU: AF-5612 · MPN: 5612

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your Pico or Pico W project on the go with the battery pack powering your circuitry....

SKU: SF-PRT-15101

This two-cell AAA battery holder is made for powering BBC micro:bit projects without needing to stay tethered to USB.The attached 6" (~150mm) lead is terminated with a JST-PH connector that mates with the JST socket on the micro:bit, making it simple to add portable power to your build.Note: JST ...

SKU: SF-GPS-30546 · MPN: GPS-30546

Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS receiver with a high-precision IMU for RTK positioning, attitude data and dead recko...