All Products

SKU: AF-6013 · MPN: ADA6013

Keep your Pixel Trinkey protected in use and during transport with this cute, minimal clear enclosure. It has been custom-designed and 3D printed to fit the Pixel Trinkey neatly.The case accommodates the reset button, 3-pin JST SH port, and the 4 terminal block outputs, so the important connectio...

SKU: AF-6177 · MPN: ADA6177

This translucent snap-on enclosure is a simple way to make a bare PCB more durable, provided your board is designed to suit the case shape. It is aimed at custom PCB projects where a low-cost off-the-shelf case is more practical than a custom 3D printed or injection-moulded enclosure.The case app...

SKU: AF-6305 · MPN: ADA6305

Keep your Adafruit Feather RP2350 with HSTX Port protected during use and transport with this cute, minimal enclosure. It has been custom-designed to fit the Feather RP2350 HSTX board, including the version with 8MB of PSRAM.The case is 3D printed from translucent milky white plastic using an SLA...

SKU: AF-5292 · MPN: 5292

A padded zipper sleeve case sized perfectly for the Raspberry Pi 400 keyboard computer. Features a stiff outer layer for impact protection, soft inner padding to keep electronics safe, and a grippy carry handle for easy transport. Also fits other compact keyboards up to 310mm × 150mm (12.2" × 6"...

SKU: AF-5095 · MPN: 5095

A screw-terminal breakout module for the Raspberry Pi Pico, designed for industrial, robotics, and prototyping applications where secure, tool-free wiring is essential. Every GPIO pin is broken out to labelled terminal blocks, making it easy to connect sensors, displays, motors, and other periphe...

SKU: AF-1566 · MPN: 1566

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and mi...

SKU: AF-1944 · MPN: 1944

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert t...

SKU: AF-3464 · MPN: 3464

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as keyboard inputs once you run the Adafruit installer script. No soldering requir...

SKU: AF-3921 · MPN: 3921

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know.  We get serious satisfaction when things fit into other things, so we fell in love with this zipper case as it is the exact perfect size for ...

SKU: AF-862 · MPN: 862

That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or l...

SKU: AF-4352 · MPN: 4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-4807 · MPN: 4807

An acrylic faceplate and hardware kit for the Adafruit MagTag. The kit includes two front plate options — a red arrow and a white cloud — plus a back plate and all the nylon mounting hardware needed for assembly. Takes just a few minutes with a Phillips screwdriver. Key Features Two Faceplate ...

SKU: AF-3284 · MPN: 3284

The Adafruit Pocket Screwdriver is a compact dual-ended tool that clips onto your shirt or pant pocket so you always have a screwdriver on hand. The Phillips head fits 3.5 mm terminal blocks commonly found on electronics breakout boards, while the slotted head works with the nylon screws included...

SKU: AF-4238 · MPN: 4238

Protect your Adafruit PyGamer with this laser-cut acrylic enclosure kit. The minimalist design showcases the board while shielding it from bumps, spills, and everyday wear. The kit includes smoke and clear acrylic panels with black nylon hardware for a clean, professional look. Assembly is strai...

SKU: AF-4277 · MPN: 4277

Everything you need to build a pocket-sized gaming handheld — no soldering required. This starter kit bundles the Adafruit PyGamer with a rechargeable battery, acrylic enclosure, speaker, button caps, and a zipper carry case. The PyGamer is powered by the ATSAMD51 (120 MHz ARM Cortex-M4) with 51...

SKU: AF-4339 · MPN: 4339

This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...

SKU: AF-4372 · MPN: 4372

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...

SKU: AF-3708 · MPN: 3708

If you didn't think that the Raspberry Pi Zero W could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero WH offers all the benefits of the Pi Zero W, but with one big difference – a pre-soldered GPIO header! This upgrade is the add...

SKU: AF-2258 · MPN: 2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-5774

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards together with I2C cables instead of using a breadboard, this grid gives your projec...