All Products

SKU: AF-3522 · MPN: 3522

For winding custom coils, or very fine-pitch rework, we always reach for magnet wire. Magnet wire is very very thin (0.1mm diameter!) copper wire with a very thin layer of insulation. It's used for a range of electronics, hacking and making applications. Commonly these are used for winding tra...

SKU: EC-SIN16080E

The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 2...

SKU: SF-PRT-13839

These are our small, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connecti...

SKU: SF-PRT-13838

These are our large, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connecti...

SKU: DF-FIT0324

INTRODUCTION This adapter is especially designed for DFRobot 12V DC Motors, adding the compatibility factor for those products without customized connectors or external power supplies. This adapter integrates an external pull-up resistor, which raises the outpu...

SKU: M5-A006

Description FACES Kit is a feast of functional panels, contains the most commonly used panels and keyboards with MEGA328processor inside, communication protocol through IIC(0x08) as slave mode. With these 3 different panels, it will be very easy to support keyboard interaction with y...

SKU: PI-ENER002-2PI

The Energenie Pi-mote Control Starter Kit lets you wirelessly control mains-powered appliances from a Raspberry Pi. The kit includes a 433 MHz RF transmitter board that connects to the Pi's GPIO header and two remote-controlled plug sockets, giving you programmable on/off control of lights, fans,...

SKU: PH-ENG-008

Engineer has been manufacturing high-quality Japanese precision tools since 1948. If you're looking for the very best precision hand tools for your projects - look no further. Check out our range of Engineer tools here! These are the Engineer Neji-Saurus screw removal pliers, available in two si...

SKU: PR-PIM458

Monitor your world with Enviro and Enviro + Air Quality for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. They're the perfect way to get started with citizen science and environmental monitoring! ...

SKU: PR-PIM355

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit with the block-based Microsoft MakeCode editor, or with MicroPython in the Mu code ...

SKU: PR-PIM638

A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range BME688 sensor on Enviro Indoor can measure temperature/humidity/pressure with a...

SKU: DF-MBT0034

The Environment Science Expansion Board V2.0 is a micro:bit add-on designed for STEAM education, integrating 14 environmental sensors and modules onto a single tree-shaped board. Students can measure UV levels, temperature, humidity, air pressure, air quality, water quality, soil moisture, sound,...

SKU: M5-U050

Including 8 Different Units: Earth, Angle, PIR, HUB, Light, RGB, IR, ENV  

SKU: PR-PIM181

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring conditions in your house, garage, or galleon. Set up a web server with Flask and ...

SKU: PR-PIM203

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables! It's ideal for monitoring conditions in your house, garage, or galleon. Set up a web server with Flask and...

SKU: SF-TOL-15038 · MPN: TOL-15038

This ER-11 collet and nut set lets you use larger tools with a 0.25" shank in your Nomad CNC machine.An extra collet nut is included, making it quicker to swap between collets without having to remove each collet from the nut first.Useful for Nomad users who want to expand their tooling options w...

SKU: PI-PTZ-41

Handle your sensitive components with care! ESD-free tip ideal for handling static sensitive components and plastic PPS tip holding an object softly without damage Anti-magnetic stainless body Standard type high wear-resistant and replaceable fine tip

SKU: AF-1209 · MPN: 1209

Keep your circuit boards spotless with this ESD-safe cleaning brush. Its stiff bristles effectively remove flux residue, rosin, and solder debris without risking damage to sensitive components from static discharge. For best results, apply a small amount of isopropyl alcohol to the PCB and scrub...

SKU: SF-CAB-24012 · MPN: CAB-24012

This is a 50mm long ESLOV to ESLOV cable. The ESLOV connector has five pins (one more than standard I2C) for automatically configuring the module and handling the sleeping states to boost battery life. Use this cable to connect two ESLOV boards together, or use this along with the SparkFun ESLOV ...

SKU: EC-CCW08266F

ESP-12F WiFi module is a security technology developed by Letter to the module integrated core processor ESP8266 smaller package size tensilica L106 industry-leading ultra low power 32-bit MCU micro, with the 16 compact mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated W...