All Products

SKU: SF-BOB-23055

With this USB-C breakout, you will be able to incorporate a vertical USB-C connector into your projects without needing to solder each tiny SMD pad. The vertical orientation of the USB-C connector also makes it convenient for panel mounts in projects.The SparkFun USB-C Breakout supplies up to thr...

SKU: AF-1905 · MPN: 1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-390 · MPN: 390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: AF-1197 · MPN: 1197

A compact dual-connector USB cable with a USB-A plug on one end and both Mini-B and Micro-B connectors on the other. The Micro-B connector carries data and power, while the Mini-B connector provides power only — handy for charging a device via Mini-B or connecting a Micro-B device for data transf...

SKU: AF-936 · MPN: 936

A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port to project enclosures for devices with Mini-B USB connections. Key Features Pa...

SKU: LB-00020

The Magpie is a 100% Arduino Uno-compatible board with a built-in debugging feature: an LED connected to every digital and analogue I/O pin via a 2N7002 MOSFET. When a pin goes high, its corresponding LED lights up, giving you instant visual feedback on pin states without needing the Serial Monit...

SKU: LB-LR0293-2

An 80 cm USB-A to Mini-B 5-pin cable for connecting devices with the standard Mini USB port. Compatible with USB hubs, cameras, MP3 players, LiPo chargers, FTDI programmers, and other Mini-B peripherals. Specifications Connector A – USB Type-A (male) Connector B – Mini-B 5-pin (male) Length ...

SKU: AF-1222 · MPN: 1222

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable enough to dedicate to every build. Program it over USB with the Arduino IDE and bri...

SKU: DF-DFR0010

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The arduino Nano automatically se...

SKU: AF-1389 · MPN: 1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: SF-DEV-11814

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily for programming and communicating with 4D Systems displays and controllers. The 5...

SKU: SF-PRT-00587

USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.

SKU: SF-DEV-09873

The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, LilyPad, and other 3.3V boards that use the FTDI connector. The board brings out...