All Products
Showing 21-40 of 100 products
Adafruit Raspberry Pi Camera Board Case with 1/4 Tripod Mount
·
The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...
Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi - 200mm
·
That's one slim cellular antenna! At 238mm long from tip to tip and and with a cable thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're ma...
Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL
·
That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're mak...
WiFi Antenna with w.FL / MHF3 / IPEX3 Connector
·
That's one slim cellular antenna! At about 220mm long from tip to tip and with a cable thickness of just 0.8mm, this 2.4GHz WiFi or BLE antenna is slim, compact, and sensitive, with a 4dBi gain. The antenna is the trace on the PCB that is at the end of the skinny coaxial cable. It has an adhesive...
Waterproof 3m Mini USB Endoscope Inspection Camera 7mm Lens
This USB endoscope inspection camera is a practical tool for looking into hard-to-reach spaces during repairs, maintenance and troubleshooting. Its slim 7mm camera head and flexible waterproof cable make it useful for damp or confined areas such as pipes, engine bays, wall cavities and machinery....
NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module
The NodeMCU R2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module), featuring a CP2102 USB-to-UART bridge for reliable programming and debugging. It integrates GPIO, PWM, I2C, 1-Wire, and ADC on a single breadboard-friendly board, and can be programmed with the Arduino IDE or NodeM...
Adafruit NeoPixel Slim LED Dot Strand - 20 LEDs at 2" Pitch
·
Need to add little dots of colour to a costume, wearable, or structure? The Adafruit NeoPixel Slim LED Dot Strand uses soft plastic cords of plated wire instead of a rigid PCB, making it easy to embed, sew over, or cast into any project. Each tiny NeoPixel dot is spaced every ~50 mm (~2″) along a...
Adafruit PiTFT - 320x240 2.8 TFT+Touchscreen for Raspberry Pi
·
The Adafruit PiTFT 2.8" is a colour touchscreen display designed for the Raspberry Pi. Featuring a 2.8-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it works as a mini console, X Window display, image viewer, or video player — all driven over the Pi's high-speed SPI int...
USB DIY Slim Connector Shell - MicroB Plug
·
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mod...
DFRobot GDI-Line-30CM 18-Pin Reverse FPC Cable - 5 Pack
·
This 30 cm flat flex ribbon cable is made for connecting compatible GDI display modules to controller boards. It uses an 18-pin reverse FPC layout with a 0.5 mm pitch, helping keep display wiring neat in compact electronics builds.The flexible polyimide construction is designed to handle tight ro...
36-pin 0.1 Short Female Header - Pack of 5
·
Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Each header strip is 36 pins long with standard 0.1" (2.54mm) pitch, compatible wit...
Ethernet RJ45 Male Plug Terminal Block
·
If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren'...
HighPi Raspberry Pi 4 Model B Case
A versatile case for the Raspberry Pi 4 with tool-free assembly and generous internal space for HATs and add-on boards. The snap-action design allows rapid installation and removal of your Pi without any tools. Tall enough to accommodate popular HATs like PoE, HiFiBerry audio, Serial, and UPS bo...
Lithium Ion Cylindrical Battery - 3.7v 2200mAh
·
A 3.7V 2,200 mAh lithium-ion cylindrical battery with built-in protection circuitry for over-voltage, under-voltage, and over-current protection. Slim enough to fit into many project enclosures and includes a JST 2-pin cable with a genuine JST connector for smooth, snag-free connections. The bat...
Tiny OTG Adapter - USB Micro to USB
·
This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks. At just ~15.5mm long, ~11.3mm wide, and ~2mm, this really is the tiniest little adapter we've probably ever seen.But d...
PiTFT Plus Assembled 320x240 2.8 TFT + Resistive Touchscreen
·
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video...
Aluminum Metal Heatsink Raspberry Pi 4 Case - Without Fans
·
A premium anodised aluminium enclosure for the Raspberry Pi 4 with completely silent passive cooling. The solid aluminium body acts as a heatsink for the main processor, keeping the Pi cool without any fans or moving parts — perfect for noise-sensitive environments like home media centres. Featu...
Aluminum Metal Heatsink Raspberry Pi 4 Case with Dual Fans
·
A premium anodised aluminium enclosure for the Raspberry Pi 4 with dual 5V DC brushless fans for maximum cooling performance. The solid aluminium construction provides excellent passive heat dissipation while the two fans ensure your Pi stays cool under sustained heavy workloads like machine lear...
SparkFun Pro RF - LoRa, 915MHz (SAMD21)
The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for...
Piunora Lite Carrier for Raspberry Pi 4 Module by Diodes Delight
·
Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications.As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piuno...