All Products

SKU: PL-1166

These 0.1 μF 100 V ceramic capacitors have many uses, including noise suppression on motors.

SKU: SF-COM-08375

This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V. If you need a bunch of these, you can get good bulk discounts on Digikey, part # : 3...

SKU: SF-COM-08571

This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 200V.Documents:Crystal Oscillator LectureSold in single pieces

SKU: TB-RC5324

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circuits. They're commonly used for decoupling, bypassing, and high-frequency filtering applications. Key Features 100pF, 50V DC – General-purpose cerami...

SKU: AF-2192 · MPN: 2192

A pack of ten 220µF 16V electrolytic capacitors with long flexible leads, ideal for breadboard and perfboard projects. These capacitors can be used with any DC voltage up to 16V and feature clear labelling on the body for easy identification. Electrolytic capacitors are well suited for low-frequ...

SKU: AF-2193 · MPN: 2193

A 10-pack of 100µF 16V electrolytic capacitors with long, flexible leads that make them easy to use on breadboards and perfboard. Each capacitor has clear labelling on the body for quick identification. Electrolytic capacitors are well suited for low-frequency filtering (~1kHz or less) and power...

SKU: AF-2195 · MPN: 2195

A 10-pack of 10µF 50V electrolytic capacitors with long, flexible leads that make them easy to use on breadboards and perfboard. Each capacitor has clear labelling on the body for quick identification. Electrolytic capacitors are well suited for low-frequency filtering (~1kHz or less) and power ...

SKU: WS-19799

SOLAR POWER MANAGER Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery Recharged From Solar Panel, Or TYPE-C Power Adapter5V/3A Regulated Output Product Features The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V re...

SKU: AF-753 · MPN: 753

These 0.1 µF ceramic capacitors are an essential component for any electronics project. Placed close to the VCC pin of your ICs, they filter out power supply noise and voltage spikes that can cause unstable behaviour — a fundamental best practice in circuit design. With 0.1″ lead spacing, these ...

SKU: TB-RC5335

A pack of 2 general-purpose ceramic disc capacitors rated at 820 pF and 50VDC. Ceramic capacitors are non-polarised and suitable for a wide range of applications including decoupling, filtering, and timing circuits. Specifications Capacitance: 820 pF Tolerance: ±10% Voltage Rating: 50VDC Ty...

SKU: SF-COM-00092

Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external caps are needed. Datasheets: 20MHz, 10/8/4MHz

SKU: SF-COM-00542

Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so no external caps are needed.

SKU: PI-COM1501

Ahhhh capacitors - the circuit builders' most reliable and trusted friend - always keen to jump in and provide stability where needed to your signals and power supply. 0.1uF - 1uF are great all-purpose bypass capacitors. Sprinkle liberally around the power pins of ICs for a smooth supply.&nbsp...

SKU: PI-COM1503

Ahhhh capacitors - the circuit builders' most reliable and trusted friend - always keen to jump in and provide stability where needed to your signals and power supply. 0.1uF - 1uF are great all-purpose bypass capacitors. Sprinkle liberally around the power pins of ICs for a smooth supply.&nbsp...

SKU: DF-DFR0940

This power filter board for Raspberry Pi integrates solid capacitors, ceramic capacitors, and tantalum capacitors in a parallel hybrid filtering configuration. It filters low, mid, and high-frequency power noise from your supply, delivering cleaner power to the entire system — particularly benefi...

SKU: AF-2214 · MPN: 2214

A 12.000MHz quartz crystal in a standard HC49/US short-style package with two 20pF load capacitors included. The crystal has 30PPM tolerance and 50PPM stability, making it precise enough for USB timing, long-term timekeeping, and RF/PLL/VCO applications. The breadboard-friendly package works with...

SKU: PL-1182

A breakout board for the Allegro A4988 DMOS microstepping stepper motor driver with translator and overcurrent protection. It lets you control one bipolar stepper motor at up to 2 A per coil (with sufficient cooling) using a simple step-and-direction interface. The board ships with all surface-m...

SKU: AF-2215 · MPN: 2215

A 16.000 MHz quartz crystal in the HC49/US short-style package, supplied with two 20pF load capacitors. The crystal provides higher precision than ceramic resonators, with 30 PPM tolerance and 50 PPM stability — suitable for USB timing, long-term timekeeping, and RF/PLL/VCO applications. The bre...

SKU: AF-2213 · MPN: 2213

This 8.000 MHz crystal comes in a standard HC49/US short-style package and is breadboard-friendly for use with any microcontroller or device that requires an external crystal. Two 20 pF load capacitors are included. With 30 PPM tolerance and 50 PPM stability, this crystal is precise enough for h...

SKU: EF-EF04011

The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel applications. The module connects via a 3-pin Octopus connector for plug-and-play use...