All Products

SKU: AF-613 · MPN: 613

Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC video and can also capture snapshots from that video stream, sending pre-compre...

SKU: AF-6402 · MPN: ADA6402

Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surrounding parts.No screws or glue are needed: snap the board into the bottom piece...

SKU: AF-6114 · MPN: ADA6114

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and connections. Key Features Tool-Free Assembly – Snap-fit design requires no s...

SKU: AF-6409 · MPN: ADA6409

Keep your Adafruit USB Type-C CC Resistor Fixer protected during use and transport with this cute, minimal snap-on enclosure. It has been custom-designed and 3D printed to suit the board and its peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble the top ...

SKU: AF-2808 · MPN: 2808

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.4" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top...

SKU: AF-3062 · MPN: 3062

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 / Pi 3 case base! This Clear Case Base and Faceplate and Buttons Combo Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style...

SKU: AF-2807 · MPN: 2807

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top' o...

SKU: AF-6124 · MPN: ADA6124

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves together for a secure fit that protects your board during use and transport. The en...

SKU: AF-6333 · MPN: ADA6333

The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. This kit includes both the Sparkle Motion Stick and a snap-on enclosure with a button lever and USB port cap. Powered vi...

SKU: AF-6505 · MPN: ADA6505

Keep your Adafruit Terminal Block BFF board protected during use and transport with this neat, minimal snap-together case.The enclosure is custom-designed and 3D printed to fit the Terminal Block BFF Add-On and its peripherals. No screws or glue are needed — snap the board into the bottom piece, ...

SKU: AF-1012 · MPN: 1012

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find one that works well with the Pi and Bone without the need of recompiling any...

SKU: AF-4230 · MPN: 4230

A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in a case, frame, or enclosure separate from the main electronics. Simply pry ope...

SKU: AF-4242 · MPN: 4242

The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...

SKU: AF-2359 · MPN: 2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-6301 · MPN: ADA6301

This cute, minimal enclosure is designed to help keep your compatible Adafruit Sparkle Motion board safe during use and transport. It has been custom-designed and 3D printed to accommodate the board’s peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble th...

SKU: AF-5981 · MPN: ADA5981

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required, simply snap the two pieces together over the Trinkey.It's...

SKU: AF-706 · MPN: 706

These extra-long stacking headers are designed for BeagleBone Capes, allowing you to stack multiple capes on a single BeagleBone for modular, expandable designs. They work just like standard 2×23 0.1"-spaced female headers, but with extended legs that solder through a PCB and plug directly into t...

SKU: AF-5998 · MPN: ADA5998

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 terminal block outputs. No screws or glue are required; simply snap the two pieces ...

SKU: AF-6002 · MPN: ADA6002

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simply snap the QT Py into the bottom piece and assemble the frame and top piece.Ther...

SKU: AF-6015

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required; simply snap the two pieces together over the Trinkey.It's...