All Products

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: DF-SER0070 · MPN: SER0070

The ST3215 is an intelligent serial bus servo for robotics and automation projects that need strong torque, position feedback and tidy wiring. It runs from a rated 12V supply and delivers 30kg.cm stall torque through a coreless motor and metal gear train.A 12-bit magnetic encoder provides 360° ab...

SKU: DF-SEN0646 · MPN: SEN0646

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and automation projects.The module supports UART, I2C and IO communication, making it...

SKU: DF-SEN0657 · MPN: SEN0657

This all-in-one weather station sensor brings seven key environmental measurements into a single outdoor unit: wind speed and direction, temperature, humidity, atmospheric pressure, light intensity and rainfall.It uses ultrasonic wind sensing, so there are no moving parts in the wind sensor, and ...

SKU: DF-SEN0684 · MPN: SEN0684

This graphene-based circular flex force sensor is built for pressure and touch sensing in tougher environments than standard FSR-style sensors. It detects force across a 20g to 6kg range, with resistance changing linearly as pressure is applied for easier interpretation in control systems.The thi...

SKU: DF-FIT0507-EN · MPN: FIT0507-EN

This compact digital thermometer gives you a simple, low-cost way to monitor temperature in wet or enclosed environments. It has an integrated display and a 1 m probe cable, making it handy for greenhouses, fish tanks, swimming pools, fridges, vehicles and indoor temperature checks.The probe is w...

SKU: AF-386 · MPN: 386

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing t...

SKU: LB-DHT11-SENSOR

The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components — just connect the included cable and start measuring. The module operates at 3...

SKU: LB-LR0298

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temperature and humidty sensor. Pinout:**- Ground- Not Used- Data- Vcc**Specifications...

SKU: AF-5183 · MPN: 5183

The DHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22.This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, it has an I²C interface! That's right, y...

SKU: LB-LR0102

The DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor comes pre-calibrated and in a breadboard compatible module form so you don't need any extra components to immediately start measuring relative humidity an...

SKU: DF-SEN0137

DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing...

SKU: SF-TOL-08794

Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long.

SKU: LB-D10

10 sided solid face dice. Dice are a very versatile resource in every classroom. These are great for teaching concepts like counting, addition, random numbers.  These give a hands on reinforce many important key maths concepts.Contains 10 White Dice

SKU: JU-PIN-STAB

A colourful hard enamel lapel pin celebrating the daily achievement of keeping your cool. Presented on a Jubly-Umph backing card with gold-backed finishing. Limited edition. Key Features Type – Hard enamel lapel pin Finish – Gold-backed Height – 40mm Edition – Limited Presentation – Mounte...

SKU: DF-SEN0343

This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance MEMS pressure chip and a special conditioning chip are encapsulated inside the sensor. It will give you a comparative measuremen...

SKU: AF-4204 · MPN: 4204

A mixed pack of 25 diffused 10 mm LEDs in five colours — white, blue, green, yellow, and red (5 of each). The large diffused lens provides wide-angle visibility and even light output, making these LEDs easy to see in daylight and from any direction. Breadboard-compatible with standard through-ho...

SKU: AF-4202 · MPN: 4202

Need some miniature indicators? We are big fans of these diffused LEDs. They are fairly bright, so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Now you can get a pack of 25 with 5 different colors Pack of 25 diffuse...

SKU: AF-680 · MPN: 680

These 5mm diffused RGB LEDs feature a built-in controller chip that automatically cycles through colours in a fast flashing pattern — no microcontroller or programming required. With just two leads (power and ground), they're as simple to use as a standard LED. The diffused lens provides an even...

SKU: DF-FIT0372

Have you ever played with LEDs and got hurt in your eyes? This pack of diffused LEDs won't. !Diffused LEDs are really useful in indications, they look softer and more uniformed so that you can see them well from any angle.This pack includes 50 5mm LEDs in 5 different colors: green, red, yellow, ...