All Products
Showing 1-20 of 48 products
USB Li-Ion Power Bank with 2 x 5V Outputs @ 2.1A - 5000mAh
·
Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...
USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs
·
A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and mi...
Barrel Jack to 2-pin JST
Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting...
Raspberry Pi Zero WH (Zero W with Headers) - v1.3
·
If you didn't think that the Raspberry Pi Zero W could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero WH offers all the benefits of the Pi Zero W, but with one big difference – a pre-soldered GPIO header! This upgrade is the add...
Raspberry Pi Zero W with GPIO card
·
If you didn't think that the Raspberry Pi Zero could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero W offers all the benefits of the Pi Zero v1.3, but with one big difference – built-in WiFi! More specifically, this giant upgrade is the addi...
PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
·
PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert t...
RainbowLink V2: 4-Channel Isolated USB to Serial Converter (RS485/RS232/Dual TTL) with Built-in 12V Power Supply
·
RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...
Wall Adapter Power Supply - 5.1V DC 2.5A (USB Micro-B)
This is a high-quality switching ‘wall wart’ AC to DC 5.1V 2,500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CSA listed and incorporates a highly regulated output switching power design to as...
Wall Adapter Power Supply 7.5VDC 1A (American Standard)
A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excessive — ideal for motor or servo applications that require a reliable mid-range vo...
Wall Adapter Power Supply 12VDC 1A (American Standard)
High quality switching 'wall wart' 'wall adapter' AC to DC 12V 1A wall power supply. These are switch mode power supplies which mean the output is regulated to 12V(no more 14V outputs!). They take 100-240Vac 50/60Hz input and output 12V 1A. These will power most projects that don't require more ...
Raspberry Pi 4 Basic Kit - 2GB
·
This starter kit is built around the Raspberry Pi 4 Model B with 2 GB of RAM, giving you the core board and essential accessories needed to get a Pi 4 project running.The Raspberry Pi 4 uses Micro HDMI for display output and USB Type-C for power, so the kit includes a Micro HDMI to HDMI cable and...
Raspberry Pi Zero W Basic Kit
·
Setting up a Pi Zero can mean tracking down a few specific cables and a suitable power supply, so this kit bundles the essentials in one package. It is centred around the compact Raspberry Pi Zero W, a small single-board computer suited to embedded builds and Internet of Things projects.The Pi Ze...
Genuino 101 Kit for Google's Science Journal App
The Genuino 101 Kit for Google’s Science Journal App is an interactive selection of tools to inspire future scientists and makers. Inside each kit you will find a collection of parts that support activities developed by Google and the Exploratorium in San Francisco. Beginning with a projec...
SparkFun ATX Power Connector Breakout Board
Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V devices! Once you have chosen a power supply (whether it be an ATX power supply ...
Passive PoE Injector Cable Set
·
Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...
2.1mm DC Barrel Jack to Alligator Clips
·
Turn any 2.1 mm barrel-jack wall adapter into a handy bench power supply with this adapter cable. The moulded DC barrel jack connects to your power supply, while colour-coded alligator clips (red for centre-positive, black for ring-negative) let you quickly clip onto bare wires, terminals, or tes...
SparkFun RTK mosaic-X5
·
The SparkFun RTK mosaic-X5 is a high-precision GNSS positioning and navigation receiver built around the Septentrio mosaic-X5 multi-constellation, multi-frequency module. Supporting GPS, GLONASS, Beidou, Galileo, NavIC, SBAS, and QZSS across L1/L2/L5 bands, the 448-channel receiver delivers centi...
Adam Tech Wall Adapter Cable (EU)
The Adam Tech Wall Adapter Cable (EU) provides a safe, ready-made connection between a European mains outlet and compatible power supplies. Terminated with a standard CEE 7/7 plug at one end and three colour-coded insulated spade terminal connectors at the other, it's designed for use with Mean W...
Peltier Thermo-Electric Cooler Module+Heatsink Assembly - 12V 5A
·
This is for people who just want to get cold fast. The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute. This assembly comes with ...
Arduino Uno R3
Note: This product is manufactured in Italy by affiliates of Arduino Srl, and the product packaging suggests downloading the Arduino IDE from arduino.org. However, we use and recommend using the normal Arduino IDE from arduino.cc, which is the IDE we ensure our Arduino libraries work with. Ard...
