All Products
Showing 1-20 of 32 products
5 inch LCD HDMI Touch Screen Display for Raspberry Pi 3
This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic
The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalone dev board and an I2C peripheral that adds GPIO, ADC, PWM, and NeoPixel support...
Adafruit ATtiny816 Breakout with seesaw - STEMMA QT / Qwiic
The Adafruit ATtiny816 Breakout with seesaw is a compact development board that combines an ATtiny816 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...
5 inch LCD HDMI Touch Screen Display for Raspberry Pi 4
This 5-inch HDMI TFT LCD touch screen is designed for Raspberry Pi 4, plugging directly onto the GPIO header with an HDMI connection for an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display uses HDMI ...
Dual Channel H-Bridge Motor Shield-V1.5
The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users c...
Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic
The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of your GPIO or analogue pins — just connect via STEMMA QT / Qwiic and start reading i...
Replacement CSI/DSI Connector for Raspberry Pi - Repair Part
·
A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...
Adafruit Universal Thermocouple Amplifier MAX31856 Breakout
·
The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +1800°C. It handles cold-junction compensation, linearisation, and fault detection ...
Raspberry Pi 4 x 8 RGB LED Matrix Expansion HAT
This RGB LED HAT adds a 4×8 matrix of individually addressable RGB LEDs to your Raspberry Pi. With 256 brightness levels and 24-bit colour depth (over 16.7 million colours), it's perfect for creating colourful displays, status indicators, and visual effects controlled by a single data pin. The H...
Adafruit 2.7 Tri-Color eInk / ePaper Shield with SRAM - Red Black White
·
Add a large, vibrant tri-colour eInk display to your Arduino project with this shield. The 2.7" panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power completely disconnected. The shield form factor plugs directly onto Arduino-compatible boards from ...
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...
Cobra Flex Modular 4WD Drive-by-Wire Chassis – Hub Motors, Open-Source
·
Cobra Flex Universal Modular Drive-by-Wire ChassisProduct Overview:Step into the future of robotics with the Cobra Flex Universal Modular Drive-by-Wire Chassis. Designed for adaptability and innovation, this 4WD compact differential chassis stands at the frontier of robotic development. Complete ...
32GB MicroSD card with latest Raspberry Pi OS
A 32GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS, ready to boot on any Raspberry Pi model including the Raspberry Pi 5. Simply insert the card, power on your Pi, and you're up and running — no manual OS installation required. These microSD cards are tested by the Raspberry...
Micro:bit Robit Smart Car（without micro:bit board）
*note colour may varyLearning about electronics and programming can be simple and fun! The Robit Smart Car is an ideal starting point for those new to electronics and programming. This gentle introduction to robotics uses the beginner-friendly BBC Micro:bit, a tiny programmable computer used...
Raspberry Pi Universal Power Supply
The official Raspberry Pi power supply (PSU) is shipped with easily interchangeable heads for the UK, US, EU and Australia meaning you can now use your Pi in all four corners of the world!Many problems people have working with the Raspberry Pi ultimately come down to using a low quality or u...
Clear Micro Potentiometer Knob - 4 pack
Add a splash of clarity to your synth, control panel, or electronics project with these clear micro potentiometer knobs. Made from hard plastic with a grippy star shape (sometimes referred to as "Davies 1900" style), they fit securely on any shaft type. Each knob works with round, D-shaft, or T1...
4-Channel Universal Fast Charger with LCD
This 4-channel universal charger handles Ni-MH, Ni-Cd, Li-ion, and LiFePO4 cells simultaneously across four independent slots. Each battery is monitored individually by a microprocessor with precise Pulse Width Modulation (PWM) control, ensuring safe and efficient charging. A single Li-ion or LiF...
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...
Adafruit 8x8 Trellis Feather M4 Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...
Yahboom OmiBox programmable cute robot car compatible with Scratch3.0 and LEGO
This is a programmable robot with a unique box shape, the size is about 100mm*87mm*70mm. The whole vehicle is composed of three PCB boards and three acrylic plates. Two wheels, the universal wheel and the PCB driver board are fixed by rivets, no need screw, no need welding. The three PCB boards a...
