All Products

SKU: AF-1712 · MPN: 1712

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your...

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: DF-DFR0679

SPRESENSE is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board allows for IoT versatility and can be developed for a vast range of uses, such as a drone utilizing the GPS and high-performance processor, a smart speaker...

SKU: AF-2217 · MPN: 2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-2210 · MPN: 2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...

SKU: AF-1552 · MPN: 1552

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...

SKU: AF-987 · MPN: 987

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...

SKU: AF-3346 · MPN: 3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: AF-4242 · MPN: 4242

The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...

SKU: PI-PIM462

The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...

SKU: DF-DFR0358

The X300 Expansion Shield is a feature-rich add-on board for the Raspberry Pi B+, 2B, and 3B. It integrates a wide range of connectivity and multimedia functions including SATA, WiFi, Bluetooth, a real-time clock, audio I/O, and a powered USB hub — all in a board that sits directly on top of the ...

SKU: DF-DFR0768

Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player! This MP3 player module supports four controlling modes: Arduino, AT command, on-board buttons, and ADKEY. You can directly press the on-board button to play or switch music without using a controller. Moreover, this player modul...

SKU: AF-4064 · MPN: 4064

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-4084 · MPN: 4084

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-3351 · MPN: 3351

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input ca...

SKU: PR-PIM275

The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two rows of 8, that are ideal as a VU meter, and 6 buttons to control your audio. We've taken the I2S mono DAC and amplifier that we used on Speaker pH...

SKU: DF-DFR0803

A HiFi digital power amplifier board with Bluetooth 5.0 and AUX input, delivering 50W per channel in a dual-channel configuration. With AM interference suppression and filtering, the board achieves THD as low as 0.1% even at sustained high-power output, producing clear, detailed sound. The board...

SKU: AF-2341 · MPN: 2341

The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 16 MB of built-in flash storage, it holds app...

SKU: AF-2342 · MPN: 2342

The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a fe...

SKU: SF-COM-11025

VS1063 is an easy-to-use, versatile encoder, decoder and codec for a multitude of audio formats. They can be hard to get hold of but we’ve got them! The VS1063 contains a high-performance, proprietary, low-power DSP core as well as ROM memory, 16KiB instruction RAM and up to 80 KiB data RAM for...