All Products

SKU: PL-1403

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae). The switch body dimension is 20.0 x 6.4 x 10.2 mm, ...

SKU: AF-4055 · MPN: 4055

This snap-in panel mount USB A extension cable lets you run a USB port through an enclosure wall without screws or drilling mounting holes. Cut a rectangular opening in your panel, snap the connector in, and the integrated bezel covers any rough edges for a clean finish. Both ends are standard U...

SKU: AF-6072 · MPN: ADA6072

A snap-in panel mount cable with a USB Type A socket on one end and bare power wires on the other. Perfect for adding a USB-A charging or power port to project enclosures without screws or drilling — just cut a rectangular hole and snap it in. The compact panel mount connector fits into a cutout...

SKU: AF-4052 · MPN: 4052

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding. What's...

SKU: AF-6073 · MPN: ADA6073

This snap-in panel mount USB cable is perfect for adding a USB host connection to your project enclosure. On one end, it features a compact USB Type-A connector designed for easy snap-in panel mounting—no screws or drilling required. The other end has a convenient wire pigtail with power, ground,...

SKU: AF-4054 · MPN: 4054

This panel mount cable will allow you to enclose a device that has an HDMI port. Perfect for placing your project in a secure box. Both ends have HDMI connectors, an extension cord if you will.What's special about this, you ask? It's a Snap-In Panel Mount Cable - much easier than a classic panel ...

SKU: AF-6126 · MPN: ADA6126

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all the connectors. No screws or glue are required; simply snap the board into the...

SKU: AF-6241 · MPN: ADA6241

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer lines or surface imperfections. No screws or glue required — simply snap the Fe...

SKU: AF-6002 · MPN: ADA6002

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simply snap the QT Py into the bottom piece and assemble the frame and top piece.Ther...

SKU: AF-6301 · MPN: ADA6301

This cute, minimal enclosure is designed to help keep your compatible Adafruit Sparkle Motion board safe during use and transport. It has been custom-designed and 3D printed to accommodate the board’s peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble th...

SKU: AF-6505 · MPN: ADA6505

Keep your Adafruit Terminal Block BFF board protected during use and transport with this neat, minimal snap-together case.The enclosure is custom-designed and 3D printed to fit the Terminal Block BFF Add-On and its peripherals. No screws or glue are needed — snap the board into the bottom piece, ...

SKU: AF-6402 · MPN: ADA6402

Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surrounding parts.No screws or glue are needed: snap the board into the bottom piece...

SKU: AF-5981 · MPN: ADA5981

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required, simply snap the two pieces together over the Trinkey.It's...

SKU: AF-6114 · MPN: ADA6114

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and connections. Key Features Tool-Free Assembly – Snap-fit design requires no s...

SKU: AF-6409 · MPN: ADA6409

Keep your Adafruit USB Type-C CC Resistor Fixer protected during use and transport with this cute, minimal snap-on enclosure. It has been custom-designed and 3D printed to suit the board and its peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble the top ...

SKU: LB-00031

A classic SNES-style USB gamepad for playing retro games on your PC, Mac, or Raspberry Pi. Plug it in and use it with your preferred emulation software — including RetroPie — for an authentic retro gaming experience. Key Features Classic SNES Layout – D-pad, A/B/X/Y buttons, L/R shoulder butto...

SKU: LB-LR0363

This SNES-style USB controller brings classic retro gaming controls to your PC, Mac, or Raspberry Pi. Plug it in and use it with your preferred emulation software to play all your favourite retro games with an authentic feel. Key Features Classic SNES Layout – D-pad, A/B/X/Y buttons, L/R shoul...

SKU: EF-EF03419

The snowflake buzzer is a symbol of Christmas day's snow. The snowflake buzzer is just like snow, comes in this Christmas night and play the Christmas music.This picture is just for a design sketch , the product includes only snowflake. The Christmas tree, the micro:bit and Alligator cables (Blac...

SKU: AF-6093 · MPN: ADA6093

A decorative COB (Chip-on-Board) LED shaped like a snowflake, using the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a rigid metal backing and coated in silicone, producing a bright, warm, and uniform glow. The ultra-thin PCB substrate allows light ...

SKU: AF-5583 · MPN: 5583

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!Socket headers are like the duct tape of electronics. They're great for connecting things, soldering to perf-boards, sockets for wires or break-away header, etc. These par...