All Products

SKU: AF-1364

This knit jersey conductive fabric is 63% cotton, 35% silver yarn and 2% spandex. Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces. It's very soft and matte, perfect for ironing onto wearables with double sided interfacing. This conducti...

SKU: AF-3670

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics safely deliver comfortable conductive and radiant heating at low voltage thr...

SKU: AF-1361

This conductive material, also known as Velostat or Linqstat, is a handy addition to a wearable and sensor hacking toolkit. It is pressure-sensitive, so squeezing the sheet reduces its resistance, making it useful for experimenting with flexible handmade sensors.It can be used as a lower-cost alt...

SKU: DF-FIT0823

Start your creative DIY project with this high-quality wire pack! The pack contains several kinds of conductive materials that basically meet your common needs of wiring. It includes conductive cloth tape with excellent flexibility, double-conductor copper foil tape, temperature-resistant aluminu...

SKU: DF-FIT0744 · MPN: FIT0744

This smooth stainless steel fibre thread lets you sew conductive paths into fabric for wearable electronics and soft-circuit projects. It offers low resistance, good thermal conductivity, a high melting point and high-temperature resistance.Each roll contains 15m of thread, with a wire resistance...

SKU: AF-4762

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! These Conductive Nylon Squares go great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fa...

SKU: LB-ETEXTILELED-W

A sewable white LED module designed for e-textile projects. This single-unit LED can be stitched directly into fabric using conductive thread, making it easy to add illumination to wearable electronics and textile-based circuits. The module uses a thicker PCB than typical LilyPad-style LEDs, pro...

SKU: AF-5652

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable.Our latest addition to the collection is this 1-meter-long Bl...

SKU: SF-DEV-14010

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circuits using conductive thread. Each LED features an ultra-thin 0.8 mm PCB with l...

SKU: AF-1458

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and conductive materials, and a few NeoPixels for experimenting with displaying your se...

SKU: DF-FIT0748 · MPN: FIT0748

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other small-current projects where ordinary wire is too stiff.Each roll includes 1 metre of thread with a resistance of about 2Ω per metre and a wire diameter of 0.96 mm. It ...

SKU: AF-3961

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...

SKU: SF-DEV-14013

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...

SKU: AF-2273

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When the ring slides up and down the ribbon, the resistance from the end of the ribbo...

SKU: AF-3960

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO glass or plastic, conductive inks, etc. We found that the metallic nylon fabric ha...

SKU: DF-FIT0743 · MPN: FIT0743

This smooth stainless steel fibre thread is made for sewing conductivity into fabric and wearable projects. It offers low resistance, good thermal conductivity, a high melting point, and high-temperature resistance.Each roll includes 25 metres of conductive sewing thread with a 0.3mm diameter and...

SKU: AF-1324

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it fully conductive. Originally this was designed to the manufacture of static-safe clothing, but its great for wearable applications as well. For example an o...

SKU: AF-641

A 3-ply conductive thread made entirely from 316L stainless steel fibre. Thin enough to sew by hand with a medium-eye needle, yet strong and smooth — ideal for wearable electronics, e-textile projects, and sewable circuits. With a resistivity of approximately 10 ohms per foot, this thread can dr...

SKU: SF-DEV-11791

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large e...

SKU: AF-603

This 316L stainless steel conductive yarn sits between a thick thread and a thin yarn in weight. Its high conductivity and soft, flexible texture make it particularly well-suited for making touchscreen-compatible gloves and other projects that require capacitive touch conductivity. Sew a few sti...