All Products
Showing 1-20 of 45 products · 15 unavailable products hidden
Atmel AVRISP STK500 USB ISP Programmer
AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...
Standalone AVR ISP Programmer Shield Kit - includes blank chip!
·
Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without a computer — program blank chips up to 10× faster with audio feedback from the b...
Adafruit High Voltage UPDI Friend USB-C Serial Programmer
·
This compact USB serial UPDI programmer is made for programming modern ATtiny chips, including parts used on Adafruit seesaw boards such as the ATtiny816, ATtiny817 and ATtiny1616. It provides selectable 3V or 5V power and logic, along with handy status LEDs so you can see power and serial activi...
USBtinyISP-Arduino bootloader programmer
This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros ...
AVR ISP Programming Cable - 6-pin and 10-pin
·
This handy AVR programming cable combines the common 10-pin and 6-pin ISP programming interfaces in one lead, making it useful when your programmer and target board use different AVR ISP header formats.The cable is about 12 inches long and mates with pins on 1/10in centres, suiting standard 0.1 i...
RainbowLink V2: 4-Channel Isolated USB to Serial Converter (RS485/RS232/Dual TTL) with Built-in 12V Power Supply
·
RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...
ESP32-S2 Feather with w.FL Antenna Connector
·
This Feather-format development board combines Espressif’s ESP32-S2 Wi-Fi microcontroller with native USB, 4 MB of flash and 2 MB of PSRAM for compact IoT builds. It is well suited to Arduino or CircuitPython projects where you want low-cost 2.4 GHz Wi-Fi and plenty of memory for larger data buff...
TinyISP USB AVR programmer
The TinyISP programmer is suited for any AVR microcontroller and con be used on the LittleBird Ruler.This programmer functions the same as the USBTinyISP from adafruit.Included in the package: TinyISP programer Ribbon Cable
Adafruit 6-pin AVR ISP Breadboard Adapter Mini Kit
·
Stop searching for the AVR ISP pinout every time you program. This simple breakout adapter converts the standard 2×3 AVR ISP box header to two breadboard-friendly 1×3 rows, making it easy to wire up your programmer without crossed wires or guesswork. The adapter plugs neatly into any standard br...
6-in-1 USB to Serial Converter
A versatile USB-to-serial converter module supporting six conversion modes: USB-TTL, USB-232, USB-485, TTL-232, TTL-485, and 232-485. Switch between modes using onboard DIP switches — no need for multiple adapters. Built around the CP2102 chip with 3.3V/5V compatibility. Includes 500mA fuse prot...
High Torque Waterproof Digital Servo with Magnetic Encoder (35KG, 360°, IP54)
·
This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...
ST-LINK V2 Emulator and Debugger
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...
Arduino Uno DIP Edition
This DIP-package edition of the classic Uno is built around the ATmega328 microcontroller and gives you a familiar Arduino platform for learning, prototyping and shield-based projects.It brings out 20 digital input/output lines, including PWM-capable pins and analogue inputs, with the essentials ...
DFRobot DFRduino UNO R3 Kit with IO Expansion Shield & USB Cable
·
This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...
Mini Wireless Keyboard - Black w/ Batteries
·
A compact wireless QWERTY keyboard with a USB dongle, ideal for pairing with a Raspberry Pi, BeagleBone, or any computer with a USB port. The slim chiclet-style keys provide a comfortable typing experience in a small footprint. The wireless USB dongle is plug-and-play — it shows up as a standard...
IOIO-OTG - V2.2
The IOIO-OTG (pronounced "yo-yo-O-T-G") is a development board that lets Java developers add hardware I/O capabilities to Android or PC applications. A PIC24FJ256 microcontroller bridges your app to low-level peripherals including GPIO, PWM, ADC, I²C, SPI, and UART, all controllable through a Jav...
Firebeetle Board-M0 (V1.0)
FireBeetle is a product series of small development boards developed by DFRobot. It contains various chipboards and expansion boards that can be used alone or in combination. The same as Arduino M0, FireBeetle M0 also adopts the high-performance low-power chip ATSAMD21G18 ARM Cortex M0+. With up ...
REV Robotics Smart Robot Servo
·
This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...
Adafruit USB-C Power Delivery Dummy Breakout - I2C or Fixed
·
This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines to request a suitable PD voltage.You can configure it with solder jumpers for f...
SparkFun MicroView - USB Programmer
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rapsberry Pi,...
