All Products

SKU: AF-954

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB por...

SKU: WS-7965

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART signals via a 4-pin 2.54mm header. Ideal for accessing serial consoles on singl...

SKU: SF-CAB-17831

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate...

SKU: SF-CAB-12977

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: AF-5699

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough, this kit which brings the power of gdb & OpenOCD step and trace debugging to th...

SKU: AF-6460 · MPN: ADA6460

This compact USB-to-serial interface adds a built-in screen to the serial adapter workflow, so you can see data passing by instead of debugging blind. It handles everything from low-speed console output to high-speed UART traffic, with line status and traffic visible on the device itself.The disp...

SKU: AF-70

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V ...

SKU: AF-5994 · MPN: ADA5994

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get this-connected-to-that. It supports RS232 serial, TTL UART serial, RS485 and RS422. All with quick-connecting screw terminals so you don't need to do any soldering ...

SKU: AF-3589

The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, giving you instant terminal access to the Pi's console — perfect for headless set...

SKU: DF-TEL0185 · MPN: TEL0185

Introduction RainbowLink is a high-performance USB protocol converter designed for multi-channel serial communication and power output, making it ideal for IoT and industrial applications. It integrates four independent communication channels—RS485, RS232, and two TTL channels—into a single devic...

SKU: RP-SC0889 · MPN: SC0889

The Raspberry Pi Debug Probe is a USB-to-debug adapter designed for solderless, plug-and-play debugging and programming of Raspberry Pi Pico and RP2040-based boards. It provides both a serial wire debug (SWD) interface and a UART interface, each using the Raspberry Pi 3-pin debug connector. Base...

SKU: DF-FIT0781

A versatile USB-to-serial converter module supporting six conversion modes: USB-TTL, USB-232, USB-485, TTL-232, TTL-485, and 232-485. Switch between modes using onboard DIP switches — no need for multiple adapters. Built around the CP2102 chip with 3.3V/5V compatibility. Includes 500mA fuse prot...

SKU: AF-18

This USB-to-serial converter adds a DB9 RS-232 serial port to your computer via USB. Based on the FTDI FT232RL chip, it delivers true RS-232 voltage levels (approximately ±10V) rather than TTL 5V — ensuring compatibility with older devices like GPS receivers, handheld programmers, and other equip...

SKU: AF-4364

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit.This is a USB C to TTL seri...

SKU: AF-4331

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit.This is a USB C to TTL seri...

SKU: AF-5995 · MPN: ADA5995

DescriptionWhether you need to interface with various serial protocols, this USB to Multi-Protocol Serial adapter has you covered. It supports RS232, TTL UART, RS485, and RS422, all with quick-connect screw terminals, eliminating the need for soldering or special cables. Simply plug the adapter ...

SKU: DF-FIT0416

Introduction This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an external crystal oscillator, has high stability and strong anti-interference. Specification VCC output: 5V/3.3V/1.8V TTL output: 5...

SKU: SF-DEV-09718

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V logic levels. The cable terminates in a 0.1" pitch, 6-pin connector commonly use...

SKU: AF-3839

The Black Magic Probe V2.1 is a next-generation JTAG/SWD debugging tool for ARM Cortex microprocessors. Unlike traditional debug dongles, it doesn't require OpenOCD or STLink — the probe itself is a GDB server, emulated through USB serial. Simply connect via GDB and start debugging directly. It ...