All Products
Showing 1-20 of 30 products · 6 unavailable products hidden
ESP32-C3-DevKit-RUST-1 - 4 MB Flash
ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application ...
Adafruit LiIon or LiPoly Charger BFF Add-On for QT Py
·
The Adafruit LiIon/LiPoly Charger BFF is a compact battery charging add-on designed to mount directly onto the back of any QT Py board. It makes portable power simple — plug in a standard 3.7 V/4.2 V lithium battery, and the charger handles the rest via the QT Py's USB-C connection. When USB is ...
Smart Charger for 18650 4.2V Li-ion battery with 2 x 18650
FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged Safe Charging Technology: Automatic stop when fully charged Cut-off voltage: 4.23...
Smart Multifunctional Charger
The LiitoKala Lii-402 is a four-slot smart charger that supports Li-ion, Ni-MH, and LiFePO4 rechargeable batteries. It automatically identifies Li-ion and Ni-MH battery types, with manual mode selection for LiFePO4 and 3.85 V Li-ion cells. Four LED indicators display charging progress at 25%, 50%...
USB Li-Ion Power Bank with 2 x 5V Outputs @ 2.1A - 5000mAh
·
Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...
Smart Charger for 18650 4.2V Li-ion battery
A 4-slot smart charger for 18650 and other cylindrical Li-ion rechargeable batteries. Each slot operates independently, so you can charge batteries of different sizes and charge levels simultaneously. USB powered for convenient use with any standard USB power source. Built-in safety features aut...
CR123A Li-ion Battery Holder for micro: Maqueen
This compact rechargeable power module is designed for micro:bit-based Maqueen educational robots. It holds a single CR123A 3.6V lithium rechargeable battery and provides a tidy power solution for classroom robotics, STEM workshops and small mobile robot projects.A built-in lithium battery chargi...
USB Li-ion Cordless Screwdriver 3.6V
This compact cordless screwdriver features a 3.6V lithium-ion battery with USB charging, making it easy to recharge from any USB port — at home, in the car, or on the go. The full metal gearbox delivers 3 Nm of torque at 350 RPM for reliable driving power in a pocket-friendly form factor. The an...
DFRobot Solar Power Manager Kit with 9V Panel
·
Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...
4-Channel Universal Fast Charger with LCD
This 4-channel universal charger handles Ni-MH, Ni-Cd, Li-ion, and LiFePO4 cells simultaneously across four independent slots. Each battery is monitored individually by a microprocessor with precise Pulse Width Modulation (PWM) control, ensuring safe and efficient charging. A single Li-ion or LiF...
Micro: IO-BOX Expansion Board
Micro: IO-BOX is a micro:bit multifunctional expansion board with on-board Li-ion battery power, delicate appearance and easy to use. We integrated numerous functions on the 6cm×6cm board such as 2-way driver motor, 9-way IO port, 2-way I2C port, 1-way serial port, 1-way buzzer, 4-way RGB LED, Li...
Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger - bq24074
·
The Adafruit Universal USB/DC/Solar Lithium Ion/Polymer Charger (bq24074) charges 3.7V/4.2V LiPo or LiIon batteries from virtually any power source — USB Type-C, DC adapter, or solar panel — with a wide 5–10V input range. Its near-MPPT solar tracking automatically draws the maximum current availa...
Pinout Motor/ Servor Shield for BBC Micro: bit
This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It’s easy to add the motor to the shield, and there is an integrate...
Beetle RP2350 Mini Dual-Core Development Board (ARM Cortex-M33 / RISC-V)
·
The Beetle RP2350 is a coin-sized development board built around the Raspberry Pi RP2350 microcontroller with a unique dual-core, dual-architecture design. Choose between ARM Cortex-M33 or Hazard3 RISC-V cores running at 150 MHz, with 520 KB of RAM and 2 MB of flash — delivering serious processin...
Lithium Battery Charger
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will wo...
FireBeetle 2 Board ESP32-S3-U (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth Routed through Cable)
FireBeetle 2 ESP32-S3-U is a high-performance main controller built around the ESP32-S3-WROOM-1U-N16R8 module. ESP32-S3-WROOM-1U-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural network computing and signal processing workloads provided by the ESP32-S3 ...
FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
FireBeetle 2 ESP32-S3 is a high-performance main controller built around the ESP32-S3-WROOM-1-N16R8 module. ESP32-S3-WROOM-1-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural network computing and signal processing workloads provided by the ESP32-S3 chip...
Beetle ESP32 - C3 (RISC-V Core Development Board)
The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...
PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
·
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2...
FireBeetle 2 ESP32-UE (N16R2) IoT Microcontroller (16MB Fl., 2MB PS., Supports Ext Antenna, Wi-Fi & Bluetooth)
FireBeetle 2 ESP32-UE (N16R2) is a powerful IoT microcontroller that supports external Bluetooth & WiFi antennas and features 16M Flash and 2M PSRAM. This product enhances memory capacity and operating space, enabling superior performance for applications such as the LVGL graphics library for int...