All Products

SKU: AF-2013

Add knobs to your grid with this add-on accessory for the HELLA UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit HELLA UNTZtrument It's perfect for adding a rotary encoder or any of our panel mount potentiometers. Swap this in during your build or...

SKU: DF-DFR0536

A gamepad expansion board for the BBC micro:bit. Plug in your micro:bit and it becomes a wireless remote controller or game console. The gamepad features eight programmable buttons (D-pad: up, down, left, right; face buttons: X, Y; front buttons: A, B), plus an onboard vibration motor, buzzer, an...

SKU: PR-PIM171

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. Key Features HAT & pHAT Landing Areas – Accepts both form factors with PCB st...

SKU: AF-4749

A nice whoppin' rectangular slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast acrylic that makes it perfect for glowy projects, especially matrices or NeoPixels.Unlike smoke or other-tinted acr...

SKU: SS-114991884

The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...

SKU: AF-5607

A panel-mount DC barrel jack extension cable that lets you add a clean, professional power input to any enclosure — without cutting custom-shaped holes. The round flange means you only need a standard 1″ (25 mm) drilled hole. Unscrew the plastic nut, insert through the panel, and tighten. Done. ...

SKU: WS-26084

Openings For 40PIN GPIO, PCIe, DSI/CSI Interfaces And Airflow Vents On The Top And For RTC Battery Connector/UART Header On The Side, With Power On/Off Button. Easy To Pull & Plug TF Card On The Bottom Product Show * for reference only, please refer to the Package Content for detailed ...

SKU: AF-1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: M5-A042

Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Connect this unit with M5Core via GROVE PORTB Single-Bus. We put Magnet on the bac...

SKU: AF-5793

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7...

SKU: WS-31501 · MPN: 31501

Unleash your creativity with the ESP32-S3 1.47inch LCD Display Development Board Type B—a powerhouse for innovators and developers alike!  Product Highlights: - Vibrant 1.47-inch LCD: Engage with a stunning 1.47inch IPS display, boasting a 172×320 pixel resolution that delivers sharp and col...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: AF-4594

A sheet of black LED diffusion acrylic designed to enhance the look of LED matrix and NeoPixel projects. This specially cast acrylic sharpens individual pixels and reduces glare, delivering vivid, readable colours both indoors and outdoors. Unlike smoke or other tinted acrylics, this black diffu...

SKU: EF-EF08231

Acrylic Case Characteristic:(1)Bright Colors, bright blue and red make the appearance more beautiful (2)High Hardness,wear-resistant and not easy to break (3)Nice Feel, pocket size and suitable for kid to operate and control. Board Buzzer and Vibration Motor: Enhance kid's gaming experience a...

SKU: AF-4261

A round panel-mount USB-C pass-through adapter that lets you add a USB-C port to any enclosure using a simple drilled hole — no custom oval or square cutouts required. At approximately 30mm diameter, a standard hole saw or drill bit is all you need. Both sides feature a USB-C jack with full pass...

SKU: AF-1622

A diffused white LED backlight strip in a 3.5 mm thick acrylic enclosure. Normally found behind LCDs, this module uses a single white LED with a specially designed acrylic diffuser to provide near-uniform illumination across the entire surface. A reflector on the back directs all light forward fo...

SKU: DF-ROB0025

INTRODUCTION The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world's self-developed control panel platform. This drive method has a strong obstacle and climbing ability with high strength aluminum alloy body. It features thick acrylic m...

SKU: DF-MBT0021-EN-4 · MPN: MBT0021-EN-4

This bundle brings together the micro:Maqueen Plus V2 robot platform, the micro:Maqueen Mechanic kit and a micro:bit V2 board for classroom STEAM projects, after-school builds and robot competitions. Batteries are not included.Maqueen Plus V2 is designed as an easy-to-start educational robot with...

SKU: DF-MBT0021-EN-18650-4 · MPN: MBT0021-EN-18650-4

This bundle brings together the micro:Maqueen Plus V2 18650 robot car, the micro:Maqueen Mechanic add-on kit, and a micro:bit V2 board for classroom STEAM lessons, after-school projects and robot competitions. Batteries are not included.Maqueen Plus V2 is an expanded educational robot platform wi...

SKU: SF-SEN-22858

A combined air quality and environmental sensor breakout featuring the ENS160 (air quality index, eCO2, TVOCs) and BME280 (temperature, humidity, barometric pressure) on a single Qwiic-enabled board. The two sensors work together — the BME280 provides real-time humidity and temperature data that ...