All Products

SKU: JU-W-LP250

Celebrate your hidden talent for working through every detail with this "Talented Over-Thinker" lapel pin by Jubly-Umph. A colourful, gold-backed hard enamel pin that comes beautifully presented on a Jubly-Umph backing card. Key Features Hard Enamel – Durable, high-quality finish with gold bac...

SKU: EC-CRF12784L

This AI-Thinker LoRa module is built on the Semtech SX1278 chip and operates at 433 MHz with a communication range of up to 10 km. Using Semtech's patented LoRa modulation technology, it achieves an exceptional sensitivity of −148 dBm with +20 dBm (100 mW) transmit power, delivering long-range, l...

SKU: DF-DFR0274

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: AF-2866

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: LB-LR0180

Including CNC Shield V3.0The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 I...

SKU: EC-ACS95915S

The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference i...

SKU: DF-DFR0734

An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communication in demanding environments. Uses a stackable connection with copper standof...

SKU: AF-2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: EC-AMC01017B

The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...

SKU: DF-DFR0577

The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...

SKU: EC-AS00121CTH

This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which is a great way to build simple capacitive touch interfaces using the I2C communic...

SKU: EC-CDE20032P

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, reliable connection between your Arduino and the panel. The shield also includes ...

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: RP-SC2166 · MPN: SC2166

Powerful On-Device AI Acceleration for Raspberry Pi 5Take your Raspberry Pi projects to the next level with the Raspberry Pi AI HAT+ 2 — a compact, high-performance AI accelerator designed for real-time machine learning at the edge.Building on the success of the original AI HAT+, this next-genera...

SKU: AF-5068

A 12-pack of clear DSA keycaps for Cherry MX and compatible switches. The transparent design allows RGB backlighting to shine through clearly, making them ideal for custom keyboards, NeoKey projects, and macro pads where per-key lighting matters. DSA profile keycaps are fully symmetric in all fo...

SKU: SF-DEV-13262

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to...

SKU: EC-AMC01219U

An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via AT commands over serial. The board includes analogue, I2C, and digital expansion ...

SKU: LB-LS0205

A WiFi-controlled relay module based on the AI-Thinker ESP-01S (ESP8266). It lets you switch AC or DC loads remotely over WiFi, making it a simple building block for smart home automation, IoT switching, and remote control projects. The module comes pre-loaded with demo firmware — supply 5V DC p...