All Products

SKU: SF-GPS-29890 · MPN: GPS-29890

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...

SKU: SF-GPS-29891 · MPN: GPS-29891

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level positioning, tilt compensation and improved navigation through brief GNSS outages.The...

SKU: SF-GPS-29491 · MPN: GPS-29491

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...

SKU: SF-GPS-29887 · MPN: GPS-29887

Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidance systems, auto-steering and high-speed robotics.The pHAT connects to a Raspberr...

SKU: PR-PIM182

The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...

SKU: SF-PRT-28765 · MPN: PRT-28765

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mounting pHATs onto Raspberry Pi boards, giving the add-on board a neat, supported...

SKU: SF-DEV-15945

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an ...

SKU: PR-PIM335

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-...

SKU: PR-PIM331

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-a...

SKU: SF-GPS-30384 · MPN: GPS-30384

Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosaic-G5 receiver.The pHAT connects to a Raspberry Pi through the standard 40-pin GP...

SKU: SF-GPS-29888 · MPN: GPS-29888

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centimetre-level positioning, tilt compensation and dead reckoning in demanding naviga...

SKU: SF-GPS-29889 · MPN: GPS-29889

Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning, tilt-aware surveying, industrial robotics and autonomous navigation projects.Th...

SKU: AF-3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Ab...

SKU: AF-1891

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value). We particularly like th...

SKU: EC-RPA08821S

This speaker equipped with 360-degree sound field integrates a cone design with a custom-built speaker to project sound in all directions. It can offer deep and rich sound with HI-FI result for it comes with 1.4 subwoofers and the vacuum base. It is a new concept integrative portable mini speaker...

SKU: SF-COM-14023

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...

SKU: WS-30315 · MPN: 30315

The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...

SKU: WS-19806

A compact 4-digit 8-segment red LED display module designed for the Raspberry Pi Pico. It plugs directly onto the Pico via an onboard female pin header and communicates over an SPI-compatible interface driven by an embedded 74HC595 shift register. The module comes with C/C++ and MicroPython demo ...

SKU: LB-LS5368

Craft your own Bluetooth speaker with this DIY kit and uncover the mechanics of speaker technology in the process. The assembly is straightforward, making it a fantastic opportunity for children to engage with sound, music, and speakers through hands-on learning. This speaker requires 4 batterie...

SKU: WS-19750

A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in how you connect. Waveshare provides ready-to-use C/C++ and MicroPython example c...